SP485 - UART converter - RS485 - SparkFun BOB-10124
- Product Code:
- 47769075
Properties
General characteristics
- Конвертер - Интерфейс
- UART - RS485
- Преобразователь - микросхема
- SP3485
Other features
- Brand
- SparkFun
Description
The module converts signals transmitted on the serial UART interface (RX, TX) in the range of the RS485 Protocol that allows you to connect up to 32 devices on one line up to 1 km with a maximum speed up to 10 MB/sec. System SP485 works in a half-duplexmode, consumes little power and works with voltages 3.3 V and 5 V.
The kit includes a module with extender SP3485, and is also necessary for the correct functioning of the passive components. The board has holes for soldering connectors:RJ45, screw ARK raster 3.5 mm, and2.54 mm goldpin strap. Connectors not included, please purchase separately.
Connection
The outputs are appropriately marked on the Bbard (the UART interface on the back). Contacts RS-485 can be marked like in the documentation of the converter SP485:
Pin Pin SP485 Description 3-5V VCC Supply voltage range from 3 V to 5 V. RX AND DI UART receiver. TX-0 Ro UART transmitter. RTS RE/DE UART interface - transfer request. GND GND The ground of the system. B B Output/ input RS-485 reversible. And And Output/ input RS-485 irreversible. G GND The ground of the system.
Specification
- Supply voltage: 3 V to 5 V
- Input voltage RS-485: -7 V to 12 V
- Place for soldering connectors:RJ45, 3.5 mm raster, spiral and goldpin strap 2.54 mm(connectors sold separately)
- The outputs are protected against short circuit
- The ability to connect up to 32 transmitters on a bus
- Module dimensions: 23 x 25.5 mm
Useful links
- The website of the manufacturer: SparkFun BOB-10124
- Diagram of the module
- System documentation SP485
- Program files Eagle
