SparkFun Buck Regulator Breakout - step-down 3,3V 2A - AP3429A - SparkFun COM-21337
- Product Code:
- 91724201
Properties
- Voltage From
- 5.5 V
- Стабилизатор - Тип
- step-down
- Стабилизатор - Тип 2
- switching
- Выходное напряжение до
- 3.3 V
- Выходное напряжение от
- 3.3 V
General characteristics
- Voltage To
- 3.9 V
Other features
- Brand
- SparkFun
Power
- Current
- 2 A
Description
Step-down converter equipped with the AP3429A voltage regulator by Diodes Inc. The module lowers the input voltage, which is in the range from 3.9 V to 5.5 V, giving the output voltage 3.3 V (current efficiency is 2 A ). On the back of the board there is a copper washer to which a heatsink can be attached to dissipate excess heat generated by the system during operation.
The manufacturer of the module has prepared a user's guide - check it out!
SparkFun Buck Regulator Breakout has screw connections and outputs in the form of soldering pads.
- It has three power supply options - screw connection, soldering pads, place for plugging in the DC connector
- Equipped with a LED diode that indicates the operating status of the module
- On the back of the board there is a copper coating to which the heatsink can be attached
The board has outputs in the form of solder pads, to which wires should be soldered and connected according to the following dependencies:
- VIN - input voltage from 3.9 V to 5.5 V
- GND - system ground
- VOUT - output voltage (adjustable 3.3 V)
- EN - control pin
In addition, the module also has a screw connection, which is an alternative connection.
- Inverter type: step-down
- Input voltage: 3.9V to 5.5V
- Output voltage: 3.3V
- Continuous output current: 2 A
- Reference voltage: 0.8V ± 1%
- No-load quiescent current: 90 µA
- Switching frequency: 1MHz
- Security:
- undervoltage lockout (UVLO)
- overcurrent
- overvoltage
- against input surges
- thermal shutdown (160°C)
Our store's assortment also includes other step-down converters, as well asstep-up and step-up / step-down converters.
At the back of the module there is a copper sheet to which a heat sink can be attached to dissipate the generated heat.
- Manufacturer's website: SparkFun COM-21337
- User Guide
- Layout diagram
- EagleCAD files
- Board dimensions
- Technical Reference AP3429A
- GitHub repository
