SparkFun Qwiic 12 Bit ADC ADS1015 - 12 bit 4 channel ADC - I2C - SparkFun DEV-15334

Bestseller

Product Code:: 54109508

SparkFun Qwiic 12 Bit ADC ADS1015 - 12 bit 4 channel ADC - I2C - SparkFun DEV-15334

84 GEL

Brand SparkFun
Shipping from Poland
Post delivery July 17
Shipping cost for orders to Georgia from GEL 190

Properties

Other features

Brand: SparkFun

Description

Product description: SparkFun Qwiic 12 Bit ADC ADS1015 - ADC 12-bit 4-channel converter - I2C - SparkFun DEV-15334

The module is equipped with the ADS1015 analog-to-digital converter from SparkFun . SparkFun Qwiic 12 Bit ADC ADS1015 has up to 4 input channels , which can be used as unbalanced inputs or in pairs for differential inputs. In addition, the module has a programmable amplifier , which makes it very sensitive to even the smallest voltage changes.

Kit contents

SparkFun Qwiic 12 Bit ADC ADS1015 - ADC 12-bit 4-channel converter - I2C - SparkFun DEV-15334 - 1 piece

ADC 12-bit 4-channel converter - equipped with screw terminals for connecting the wires.

The product is compatible with Arduino The manufacturer has prepared a detailed user guide . You will find there, among other things, a description of the system, the arrangement of pins and a sample program code.

4-output converter - ADC converter from SparkFun.

A / C converter operating principle

Transducers and converters are tools that convert one physical quantity into another. The task of the A / C converter is to convert an analog signal into a digital signal, and thus it is possible to connect digital modules - e.g. Arduino or Raspberry Pi with analog devices and sensors.

Connection of the transducer and description of the leads

The leads are solder pads and screw connectors, allowing for soldering goldpin connectors, 2.54 mm pitch (not included). Thanks to them, it is possible to connect the system with the breadboard or the main module (eg Arduino ) using wires . The board also includes a Qwiic connector, which could be a soldering-free alternative that reduces the number of wires.

GND - the ground of the system
VCC - power pin
SCL - clock line of the I2C bus
SDA - data line of the I2C bus
ALRT - an alarm signal generated when the analog value exceeds the set threshold
A0, A1, A2, A3 - analog inputs

Technical specification of the module

Module type: transducer
Type: ADC analog-to-digital converter
Built-in chip: ADS1015
Number of channels: 4
Operating voltage (VDD): 2 V to 5.5 V
- with power supplied through the Qwiic connector: 3.3V
Current consumption (typical): from 150 uA to 200 uA
Modes of operation:
- Single Shot - single conversion
- Continuous Conversion - continuous conversion (default)
- Duty Cycling - cyclic conversion
Type of measurement:
- single signal - 12-bit resolution
- differential signal - 11-bit resolution
Full Scale Range (FSR): ± 0.256V to ± 6.114V (default 2.048V)
LSB size: 0.125 mV to 3 mV (default is 1 mV)
Sampling frequency: 128 Hz to 3.3 kHz
Communication interface: I2C bus
I2C bus address:
- default: 0x48
- configurable: 0x49, 0x4A or 0x4B
Operating temperature range: -40 ° C to 125 ° C
Built-in 10 kOhm potentiometer
Screw terminals for connection without soldering
2x Qwiic connector