STM32 NUCLEO-F413ZH - STM32F413ZHT6 ARM Cortex M4

• Microcontroller: STM32F413ZHT6
  • Core: ARM Cortex M4 32-bit
  • Clock frequency: 100 MHz
  • Flash memory: 1 MB
  • RAM: 256 KB
  • Analog-to-digital converter (ADC): 12-bit, 16-channel
  • The number of 16-bit Timers: 13
  • The number of 32-bit Timers: 2
  • Interfaces: 3x I2C, 5x SPI, 5x I2S, 3x CAN, 4x USART, 6x UART, USB OTG FS
• Two types of connectors:
  • Connectors for shields compatible with Arduino Uno Rev3
  • Standard pins of STMicroelectronics Morpho to access the pins of the microcontroller
• The module is compatible with the operating system mbed (mbed.org)
• The debugger ST-Link/V2 is placed on the board with the possibility to work as a standalone device with the SWD output
• Power:
  • Via USB
  • External source: 3.3 V and from 7 to 12 V via ST Zio connectors or ST morpho
  • 5V through the ST morpho connector
• Embedded three LEDs:
  • 1 x for indication of supply voltage
  • 1 x indicator of connection
  • 1 x at the user's disposal
• Two buttons:
  • 1 x RESET
  • 1 x at the user's disposal
• Ethernet IEEE-802.3-2002 interface support 
• The quartz resonator: 32,768 MHz
• Three different interfaces via the microUSB connector(USB re-enumeration):
  • Virtual COM port
  • Mass memory
  • Port for programming/debugging
• The module is supported by most of the popular environments, i.a.: IAR, Keil and the platforms based on GCC compiler

A detailed description can be found in thedocumentationand onthe website of the manufacturer.

Nucleo allows for the implementation of projects, based on powerful microcontroller with 32-bit core ARM Cortex. The modules are compatible with Arduino shields and the compiler's system on-line mbed.org. Nukleo works with most of the popular development platforms, including Keil, IAR and environments based on the GCC compiler.

• Websiteof the manufacturer: STM32 Nucleo
• Documentation of microcontroller STM32F413ZH
• Documentation of Nucleo
• User manual
• Nucleo-144 instruction