Teensy 4.0 ARM Cortex-M7 - Arduino compatible - version with connectors - SparkFun DEV-16997

Bestseller
54829191
188 GEL
  • Brand SparkFun
  • Shipping from Poland
  • Post delivery June 5
  • Shipping cost for orders to Georgia from GEL 193

Properties

UC - RAM
1024 kB
UC - USB
microUSB
UC - I2C
yes
UC - ядро
1. Single Core
UC - UART
yes
Voltage From
5.5 V
UC - Вспышка
2048 kB
UC - frequency
600 MHz
UC - SPI Interface
yes
Интерфейс UC - CAN
yes
Выходное напряжение от
3.3 V
Выходное напряжение до
3.3 V
UC - Цифровые контакты
40

General characteristics

UC - A/C
13-bit
UC - ядро
32-bit ARM Cortex M0
Voltage To
3.6 V
UC - EEPROM
64 kB
UC - аналог в
14
UC - microcontroller
MIMXRT1062 DVL6A

Other features

Brand
SparkFun
Nominal output voltage
3.3 V

Description

Product description: Teensy 4.0 ARM Cortex-M7 - compatible with Arduino - version with connectors - SparkFun DEV-16997

Teensy 4.0 is a compact development board. The module is equipped with the NXP iMXRT1062 microcontroller with the ARM Cortex-M7 600 MHz core, has 2048 KB of Flash memory and 1024 KB of RAM memory. The module has 40 I / O pins, including 31 PWM channels, 14 analog inputs, DMA controller and popular communication interfaces: SPI, I2C, I2S, CAN. Teensy 4.0 is the same size and shape as Teensy 3.2 and is compatible with most pin functions in Teensy 3.2.

Teensy 4.0 ARM Cortex-M7 - compatible with Arduino - version with connectors - SparkFun DEV-16997.

Teensy 4.0 ARM Cortex-M7.

Teensy 4.0 microcontroller programming

The module has a pre-loaded bootloader, so you can program the microcontroller using the built-in microUSB connector , without the need for an external programmer. To run, you will need a microUSB cable (not included). In order to program the module, you can use any C language environment or, after uploading the teensyduino extension, the Arduino IDE environment.

Specification Teensy 4.0 ARM Cortex-M7
  • Supply voltage: 3.5 V to 6 V
  • Microcontroller: NXP iMXRT1062
  • Core: ARM Cortex M7 600 MHz
  • Flash memory: 2048KB (64K reserved for EEPROM recovery and emulation)
  • RAM memory: 1024 kB
  • 14 high-resolution analog inputs
  • 40 digital inputs / outputs
  • 31 PWM outputs
  • 14 hardware timers
  • MicroSD card port, native (4-bit SDIO)
  • 2x high speed USB port (480 Mb / s)
  • 7 UART interfaces (4 with FIFO and fast baud rates)
  • 1 digital S / PDIF audio port
  • Interfaces: 3x SPI, 3x I2C, 2x I2S, 3x CAN bus (1 with CAN FD)
  • 32 DMA channels
  • Random number generator
  • Cryptographic unit
  • Programmable FlexIO
  • RTC for date and time
  • Power on / off management
  • Dimensions: 35 x 18 mm

The subject of sale is the Teensy 4.0 module with connectors.

Useful links
  • The website of the manufacturer - SparkFun DEV-16997
  • A guide for Teensy users
  • Documentation of the MIMXRT1062 DVL6A microcontroller
  • Manual for the MIMXRT1062 DVL6A microcontroller