TinyESP – WiFi Kontroler

Universal WiFicontrollertinyESP withfullopen sourcesoftwareEasyESP. The module is based on popularESP266chip which allows devices to communicate viaWiFi. TinyESP is pre-programmed and requires only initial configuration.

• Power supply via microUSB (5 V) or Li-Pol battery
• Relay with NO, C, NC contacts
• 1-wire bus for temperature sensors
• Universal logic or pulse input
• I2C bus and UART serial port
• 2.54 mm connector to connect 0.96" OLED display
• Buzzer, responsible for sending acoustic notifications
• Transmitting IRDA diode, sending messages through the use of infrared technology

The manufacturer provides a user manual inPolishandEnglishand a detaileddescription ofthe WiFi controller.

WiFi controller - tinyESP.

• Measurement of ambient parameters: temperature, humidity, smog level, CO2, lighting
• Voltage measurements in the range from 0 V to 5 V
• Monitoring of logic state 0-1
• Cyclic sending of measurements to own server (eg Domoticz, OpenHAB) or to the cloud (eg mqtt.ats.pl)
• Controlling devices using relay or transmitting diode
• Simple automation - switching on the relay after exceeding the set value from the sensor
• Sending e-mail notifications
• Control of current data using the display
• Simple distance measurement
• Support for RFID readers

• Supply voltage 5 V
• Relay: max. 3 A / 120 V AC
• Maximum power consumption: 5 W
• Radio interface: WiFi 2.4 GHz 802.11bgn
• Dimensions: 72 x 40 x 3 mm (without DIN holder)
• Weight: 42 g

• User manual in Polish
• English user manual
• Leads description
• About ESPEasy