USB-UART (TTL) converter - PL2303 - USB plug A - V2 version - Waveshare 20265

Bestseller

Product Code:: 54837107

USB-UART (TTL) converter - PL2303 - USB plug A - V2 version - Waveshare 20265

24 GEL

Brand waveshare
Shipping from Poland
Post delivery June 3
Shipping cost for orders to Georgia from GEL 192

Properties

Конвертер - Интерфейс: UART
Преобразователь - Розетка: USB

General characteristics

Преобразователь - микросхема: PL2303

Other features

Brand: waveshare

Description

Product description: USB-UART (TTL) converter - PL2303 - USB A plug - version V2 - Waveshare 20265

A communication module in the form of a converter that enables communication between USB and UART serial interfaces. It allows the exchange of data between the computer and systems using microcontrollers. The module is based on the PL2303GS chip . In the operating system it is visible as a virtual COM port. UART interface voltage can be 1.8V / 2.5V / 3.3V / 5V .

Communication module - USB-UART (TTL) converter - PL2303 - USB A plug - version V2 - Waveshare 20265.

USB-UART (TTL) converter with PL2303 chip.

The main features of the converter

Equipped with a chip in the new version V2 - PL2303GS
Supports Windows XP / 7/8/10/11
It has three power supply modes - 3x VCCIO configured by setting a jumper:
- VCCIO-5V: 5V output
- VCCIO-3.3V: 3.3V output
- open the jumper: powered from the target board with the voltage of 1.8V / 2.5V / 3.3V / 5V)
Equipped with three LEDs acting as indicators: TXD, RXD, PWR

Attention!

The Waveshare 20265 module is compatible with TTL level ONLY, to avoid damage, please DO NOT connect it directly to the RS232 circuit.

Description of the converter pins

VCCIO - 3.3 V or 5 V output (the module is powered from the USB A port, and the jumper on the board should be shorted to 3.3 V or 5 V)
GND - the ground of the system
TXD - MCU.RX pin of UART transmitter (signal direction: MCU.RX PL2303 >> PC.RX)

Kit contents