VETUS 12V Sanitary Processor 42 x 36 x 12 cm

Particularly on larger boats, owners often wish to install deluxe sanitary ware of their preferred style and colour; just like at home. In order to fulfil this requirement, VETUS has developed the Sani-Processor, with an electric macerator and a pump, so that an ordinary domestic toilet may be used on board. The Sani-Processor can be easily connected to a standard toilet, by means of 102 mm diameter hose (with a minimum fall of 50 mm per metre). When the toilet is flushed, the Sani-Processor will collect the contents, macerate them and pump the resultant slurry into a holding tank or directly overboard, through a hose of only 19 mm diameter. The whole process takes between 10 and 30 seconds and works almost silently. In the unlikely event of a blockage, the unit can be easily cleaned by removing the inspection lid. The connecting hoses must be odour-tight and we recommend the use of VETUS sanitary hose, type SAHOSE19. Specifications: - 12 Volt DC. - Macerator diameter: 98 mm - Nominal power consumption: approx. 370 W. - Dimensions: 420 x 120 x 360 mm (l x w x h) - Hose from toilet to Sani-Processor: ø 102 mm, maximum length 4 metres. - Hose from Sani-Processor to holding tank: ø 19 mm, maximum length 20 metres. - The holding tank may be maximum 4 metres higher than the Sani-Processor - Washbasin/bidet connections: ø 40 mm - Weight: 4.8 kg - Pump capacity: approx. 50 l/min at 4 m head.