Water / gas ball valve actuator ZigBee Tuya ZIG-WVZ

A simple controller allowing remoteclosing or opening of a ball valve witha lever. Servo-based device allows to close the valve with water or gas supply in case of e.g. flooding or detection of harmful gas. It can be combined with a suitable sensor to form an automated system. The connection is based on the ZigBee network. Aconnection to the ZigBee gateway is requiredforthesensor to function properly.

ZigBee ball valve actuator.

Note

The device to work properly requires a connection to theZigBeegateway,which can be purchased separately.

• Easy to install without interfering with the existing installation
• Remote or automatic control from anywhere in the world in Tuya / Smart Life application
• Easy integration into the application
• Control by schedule, timer or other devices or sensors
• Watertight housing
• 12 V power supply (power supply included)
• Possible local control by means of a button on the housing
• Built-in clutch allows manual control of the valve lever position in case of a power failure

• Control of gas or water supply according to schedule or timer
• Automatic watering of the garden
• Wide range of agricultural applications
• Automatic closure of the water supply when the sensor detects flooding
• Automatic closure of the gas supply when a leak is detected by the sensor

• Communication protocol: ZigBee 3.0 according to standard 802.15.4
• Antenna: built-in
• Status indicator: LED
• Power supply voltage: 12 V (power supply included)
• Operating temperature: -20°C to 60°C
• Operating humidity: 0% to 80% RH
• Housing dimensionss: 80 x 70 x 70 mm
• Weight: 350 g

• ZigBee water / gas valve actuator
• Mounting bracket - 2 pcs. + screws
• Power supply

Set contents.

• Android application
• iOS application