WCH CH9102F Friend - USB-UART converter with USB type C connector - Adafruit 5568

The WCH CH9102F Friend converter from Adafruit enables communication between two popular USB and UART serial interfaces, it can be used to exchange data between a computer and a microcontroller or to program boards with a serial interface, e.g. Arduino or STM32Discovery . It enables users to transfer data at speeds up to 3 Mb/s . The module is equipped with the function of automatic reset of the Arduino / ATmega328 boards, thanks to which there is no need to connect an additional button to the pins. The board operates with a voltage of 3.3 V and works with 5 V signals. On the board you can also find GPIO ports and two LEDs indicating the operating status.

WCH CH9102F Friend - USB-UART converter with USB type C connector - Adafruit 5568.

Components included in the set.

• Built-in chip: WCH CH9102F
• Module type: USB-UART converter
• Transmission speed: 3 Mbit/s
• Replacement chips: FTR232, FT231x or CP210x
• Supply voltage: 3.3V / 5V
• Operating status indication: 2 LEDs (TXD, RXD)
• Connector: USB Type-C
• Leads: solder pads
• Board dimensions: 29 x 17.8 x 4.9 mm
• Weight: 2.2g

• WCH CH9102F Friend - USB-UART converter with USB type C connector - 1 piece
• Goldpin strip 1x16-pin - raster 2.54 mm - 1 piece
• 1x6-pin female socket - raster 2.54 mm - 1 piece

• Manufacturer's website: Adafruit 5568
• User Guide