WizFi360-EVB-Pico - board with RP2040 microcontroller and WiFi communication - WIZnet

Module manufactured by WIZnet , equipped with Raspberry Pi RP2040 microcontroller - dual-core ARM Cortex M0+ clocked at 133 MHz , with 264 kB of RAM and external Flash Quad-SPI memory with eXecute In Place (XIP). The manufacturer also used the WizFi360-PA system, which extends the functionality of the board with wireless WiFi communication - it provides a wireless 2.4 GHz band and is compatible with 802.11 b/g/n standards and supports SoftAP , Station and SoftAP+Station modes. The module also includes a microUSB connector (type B) for power and programming, and a 3-pin ARM serial debug (SWD) port. WizFi360-EVB-Pico is used as an actuator in IoT solutions.

WizFi360-EVB-Pico - board with RP2040 microcontroller and WiFi communication - WIZnet.

The board has as many as 40 leads.

• Raspberry Pi RP2040 microcontroller and WiFi wireless communication system
• Support Station / SoftAP / SoftAP+Station operating modes
• Data pass-through and AT command data transfer support
• Support AT serial command configuration
• Support TCP Server / TCP Client / UDP working mode
• Support operation channel configuration from 0 to 13
• Support 20MHz/40MHz auto bandwidth
• Supports WPA_PSK / WPA2_PSK encryption
• Support built-in unique MAC address and user configurable address

• Dual-core ARM Cortex M0+ clocked at 133 MHz
• 264 kB onboard SRAM
• External Quad-SPI Flash with eXecute In Place (XIP)
• 12-bit analog-to-digital converter (ADC) 500 fps
• Communication interfaces: 2x UART, 2x I2C, 2x SPI, 16x PWM channels
• SWD interface for debugging
• 1x timer with 4 alarms, 1x RTC real time counter
• Supported programming languages: C/C++ and MicroPython

Description of the module pins. For more information on the individual pins, see the user's guide .

Components included in the set.

• Wireless communication type: WiFi
• Band: 2.4GHz
• Supported standard: 802.11 b/g/n
• Serial port baud rate: 600 bps to 2 Mbps with 16 common values
• Support up to 5 TCP/UDP connections
• Obtaining an IP address automatically from a DHCP server (station mode)
• DHCP service for wireless LAN clients (AP mode)
• DNS support for communication with servers by domain name
• "Keep-Alive" support for TCP connection monitoring
• "Ping" support to monitor network status
• Supports firmware update via UART Download / OTA (via WLAN)

• WizFi360-EVB-Pico - board with RP2040 microcontroller and WiFi communication - WIZnet - 1 piece
• Goldpin strip - raster 2.54 mm - 2 pieces

• Manufacturer's website: WIZnet WizFi360-EVB-Pico
• User Guide
• RP2040 technical documentation
• WizFi360 technical documentation