YACHT DEVICES NMEA2000 Micro Male USB Male Gateway
Bestseller
- Product Code:
- 108382784
1,308 GEL
Properties
Design
- Color
- Black
Other features
- Brand
- Yacht Devices
Description
The Gateway allows you to see data from a NMEA 2000 marine digital network on a PC, laptop or tablet PC with Microsoft Windows, Mac OS or Linux with it, you get marine network data including vessel course, speed, position, wind speed and direction, water depth, AIS messages from vessels and aircrafts and other navigation data in PC applications like OpenCPN, Expedition, Coastal Explorer, Polar View, OpenSkipper, etc the device works as a bi-directional gateway so it is also possible to send messages from PC applications to the NMEA 2000 network.
That allows, for example, sending of AIS data from a PC USB receiver to a chart plotter, as well as control over the autopilot and the vessel´s other equipment.
It also supports using a PC as an 0183 to NMEA 2000 converter if you have some NMEA 0183 equipment connected to one of the other PC ports the Device can be configured to work in one of the following operation modes:
0183 in this mode.
The Device performs conversion from NMEA 2000 (binary protocol) to NMEA 0183 (text based protocol) and vice versa.
NMEA 0183 is a very old and very popular protocol supported by virtually all marine PC applications.
Conversion from NMEA 2000 covers all significant data, including AIS and autopilot.
N2K.
Device sends all messages from NMEA 2000 to PC and vice versa in a binary form and is compatible with Coastal Explorer, Expedition, Polar View, OpenSkipper and some other marine software.
RAW.
Device sends all messages from NMEA 2000 to PC and vice versa in readable text format, similar to the format of NMEA 2000 logs used in chart plotters.
This format can be useful to diagnose a network or to create your own applications.
Supported in Expedition 10.7.23 and higher versions.
You can record messages to a CAN file and/or monitor in real time with free CAN Log Viewer software (Mac OS X, Windows, Linux) the recorded.
CAN file can be converted to a DAT format and processed with YDVR Converter software to convert NMEA 2000 data to GPX tracks, spreadsheets and other formats of course, it is not as convenient as recording data with the Voyage Recorder, but it is suitable for tests and trials, etc.
AUTO in this mode.
The Device analyzes the connection with the PC application and automatically chooses one of the three modes above for the session the Device connects to PC by USB cable (photos of YDNU-02NF, YDNU-02NF, YDNU-02NM and YDNU-02RM models) and is compatible with USB 1.1 and higher.
at the software level.
The Device is a virtual COM port (USB device class 2, subclass 2) in Mac OS X, Linux and Windows 10, such devices do not require a special driver the operating system automatically uses a system driver in older Microsoft Windows versions, you will need to install a driver the Device does not require any special software.
You can select the preferred operation mode or initiate recording of diagnostics data using an operation system command line to update the firmware, you just need to send an update file to the Device´s port with a ´copy´ (MS-DOS and Microsoft Windows) or ´cp´ (Linux and Mac OS X) command with any terminal program, you can get access to a service menu, where you can configure filters for received and transmitted messages and tune some other settings.
That allows, for example, sending of AIS data from a PC USB receiver to a chart plotter, as well as control over the autopilot and the vessel´s other equipment.
It also supports using a PC as an 0183 to NMEA 2000 converter if you have some NMEA 0183 equipment connected to one of the other PC ports the Device can be configured to work in one of the following operation modes:
0183 in this mode.
The Device performs conversion from NMEA 2000 (binary protocol) to NMEA 0183 (text based protocol) and vice versa.
NMEA 0183 is a very old and very popular protocol supported by virtually all marine PC applications.
Conversion from NMEA 2000 covers all significant data, including AIS and autopilot.
N2K.
Device sends all messages from NMEA 2000 to PC and vice versa in a binary form and is compatible with Coastal Explorer, Expedition, Polar View, OpenSkipper and some other marine software.
RAW.
Device sends all messages from NMEA 2000 to PC and vice versa in readable text format, similar to the format of NMEA 2000 logs used in chart plotters.
This format can be useful to diagnose a network or to create your own applications.
Supported in Expedition 10.7.23 and higher versions.
You can record messages to a CAN file and/or monitor in real time with free CAN Log Viewer software (Mac OS X, Windows, Linux) the recorded.
CAN file can be converted to a DAT format and processed with YDVR Converter software to convert NMEA 2000 data to GPX tracks, spreadsheets and other formats of course, it is not as convenient as recording data with the Voyage Recorder, but it is suitable for tests and trials, etc.
AUTO in this mode.
The Device analyzes the connection with the PC application and automatically chooses one of the three modes above for the session the Device connects to PC by USB cable (photos of YDNU-02NF, YDNU-02NF, YDNU-02NM and YDNU-02RM models) and is compatible with USB 1.1 and higher.
at the software level.
The Device is a virtual COM port (USB device class 2, subclass 2) in Mac OS X, Linux and Windows 10, such devices do not require a special driver the operating system automatically uses a system driver in older Microsoft Windows versions, you will need to install a driver the Device does not require any special software.
You can select the preferred operation mode or initiate recording of diagnostics data using an operation system command line to update the firmware, you just need to send an update file to the Device´s port with a ´copy´ (MS-DOS and Microsoft Windows) or ´cp´ (Linux and Mac OS X) command with any terminal program, you can get access to a service menu, where you can configure filters for received and transmitted messages and tune some other settings.
