Arduino Nano Every - module ABX00028

Bestseller

Product Code:: 42762993

74 GEL

Brand Arduino
Shipping from Poland
Post delivery July 20
Shipping cost for orders to Georgia from GEL 118

Properties

UC - I2C: yes
UC - USB: microUSB
UC - PWM: 6
UC - UART: yes
UC - ядро: 8-bit AVR, 1. Single Core
Voltage To: 6.0 V
UC - Разъем: 5V microUSB
UC - аналог в: 8
UC - SPI Interface: yes
Выходное напряжение до: 5.0 V
UC - Цифровые контакты: 14
Выходное напряжение от: 3.3 V

Features

Product Type: Запчасть для микрокомпьютера

General characteristics

UC - RAM: 6 kB
UC - EEPROM: 256 B
UC - Вспышка: 48 kB
Voltage From: 21.0 V
UC - frequency: 20 MHz
UC - microcontroller: ATmega4809

Other features

Brand: Arduino
Nominal output voltage: 5.0 V

Description

Description: Arduino Nano Every

The Every model is based on theATMega4809 AVRprocessor with a 20 MHz clock, 48 kB flash memory and 256 B EEPROM. The user has30 pins,15 on each side. TheATSAMD11D14Amicrocontroller is responsible for communication with PC. The board has dimensions 45 x 18 mm.

Offered board has a lead for self-assembly. In our offer we also have a version withconnectors.

Arduino Nano Every.

Programming and possibilities of Arduino Nano Every.

You can program the Arduino Nano Every board viaArduino IDE, both onlineand offline.MicrocontrollerATSAMD11D14Aworks as USB - UART converter. On the 30 pins you can findGPIO, SPI, I2C, PWM, USART and ADCamong others. Power and RESET pins are also available.

Arduino Nano Every output.

Main features of Arduino Nano Every

Nano user has 14 digital pins, 6 PWM outputs and 8 analogue pins. Arduino Nano Every can be powered via microUSB port with 5 V or via V in with 6 V to 21 V.

Pin Designation Type Description 1 D13 Digital SPI, SCK, GPIO 2 + 3V3 Power output Power supply for external devices 3 AREF Analogue Reference pin, can be used as GPIO 4 A0 Analogue ADC input, canbe used as GPIO 5

Analogue ADC input,canbe used as GPIO 6 A2 Analogue ADC input,canbe used as GPIO 7 A3 Analogue ADC input,canbe used as GPIO 8 A4 / SDA Analogue ADC input,canbe used as GPIO 9 A5 / SCL Analogue ADC input,canbe used as GPIO 10 A6 Analogue ADC input,canbe used as GPIO 11 A7 Analogue ADC input,canbe used as GPIO 12 +5 V Power output Power supply for external devices 13 RST Digital input Active reset 14 GND Power supply Mass 15 VIN Power supply Power supply 16 TX Digital USART TX,canbe used like GPIO 17 RX Digital USART RX,canbe used like GPIO 18 RST Digital Active reset 19 GND Power supply Mass 20 D2 Digital GPIO 21 D3 / PWM Digital GPIO,canbe used like GPIO 22 D4 Digital GPIO 23 D5 / PWM Digital GPIO,canbe used like GPIO 24 D6 / PWM Digital GPIO,canbe used like GPIO 25 D7 Digital GPIO 26 D8 Digital GPIO 27 D9 / PWM Digital GPIO,canbe used like GPIO 28 D10 / PWM Digital GPIO,canbe used like GPIO 29 D11 MOSI Digital SPI MOSI,canbe used like GPIO 30 D12 / MISO Digital SPI MISO,canbe used like GPIO Specifications of Arduino Nano Every

Supply voltage: 6 V to 21 V
Microcontroller: ATMega4809
- Clock: 20 MHz
- Flash memory: 48 kB
- SRAM 6 kB
- EEPROM 256 B
Digital pins: 14
PWM pins: 6
Analogue pins: 8
MicroUSB socket
Interfaces: GPIO, SPI, I2C, USART, PWM
Transducers: ADC
Dimensions: 45 x 18 mm