BME688 - 4-in-1 environmental sensor - AI module - I2C / SPI - Waveshare 24244

Бестселлер
124078719
4 075 ₽

Мы выстраиваем выгодные партнерские отношения с поставщиками электроники waveshare и отобрали для вас лучших производителей брендовых товаров из Европы, Америки, Турции и ОАЭ, специализируясь на аутлетах и дискаунтерах. Прямая доставка из-за рубежа до покупателя нашими логистическими решениями — это оптимизированные и экономичные решения, вы не переплачиваете в цене товара за расходы на торговые помещения и шоурумы. Заказ будет отправлен напрямую с нашего склада по указанному вами адресу, по цене недоступной для местных магазинов.

Оригинальные брендовые товары в широком ассортименте с вкусными скидками — так можно описать наш интернет магазин. Доставка заказа будет отслеживаться на всех этапах покупки и работает сразу после оплаты заказа.

  • Бренд waveshare
  • Доставка из Польши
  • Пункт выдачи СДЭК 8 июня
  • Стоимость доставки заказа в Россию от 852 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

UC - I2C
yes
Напряжение до
3.3 V
Напряжение от
5.0 V
Интерфейс UC - SPI
yes
Точность измерения температуры датчика
+/- 0.5 °C

Прочие свойства

Бренд
waveshare
Тип датчика
temperature, humidity, pressure

Описание

Product description: BME688 - 4in1 environmental sensor - AI module - I2C / SPI - Waveshare 24244

The module manufactured by Waveshare, based on the Bosch BME688 multi-functional environmental sensor system, enables the measurement of temperature , humidity , atmospheric pressure and the detection of gases contained in the air . Thanks to the built-in AI system, it is possible to distinguish between: volatile sulfur compounds, organic compounds, carbon dioxide, hydrogen and many other substances. It allows you to measure temperature in the range from -40°C to 85°C with an accuracy of +/- 0.5°C, humidity from 0% to 100% relative humidity with an accuracy of ±3% and pressure from 300 hPa to 1100 hPa with accuracy up to ±0.6 hPa. Communication with the microcontroller takes place via the I2C or SPI interface, and the supply voltages are 3.3 V or 5 V.

BME688 - 4in1 environmental sensor - AI module - I2C / SPI - Waveshare 24244.

The sensor is compatible with Arduino and Raspberry Pi !

The manufacturer provides a detailed user guide and sample code to operate the module.

Built-in AI system that allows you to recognize gas contained in the air.
Basic parameters of the BME688 sensor
  • Measured parameters: temperature, atmospheric pressure, air humidity, gas detection
  • Built-in AI system that allows you to recognize gas contained in the air
  • Measurement range:
    • Temperatures: from -40°C to 85°C with an accuracy of +/- 0.5°C (for temperatures from 0°C to 65°C)
    • Relative humidity: from 0% to 100% with an accuracy of ±3%
    • Pressure: from 300 hPa to 1100 hPa with an accuracy of ±0.6 hPa (at temperature from 0°C to 65°C)
    • VOC content: 0d 0 to 500 IAQ (Indoor Air Quality)
  • Communication interface: I2C and SPI
  • Supply voltage: from 1.71 V to 3.6 V
  • Sensor measurement duration:
    • humidity: 8 s (for a change of 90% RH)
    • gases: 10.8 s
Description of the module pins

The I2C and SPI interfaces used for communication with the module are provided on the 6-pin JST connector. Additionally, the user has pins at their disposal that allow them to solder their own wires. These included:

  • CS - Chip Select SPI interface
  • ADDR/MISO - I2C address or SPI data pin
  • SCL/SCK - clock of both interfaces
  • SDA/MOSI - data pin of the I2C and SPI interfaces
  • GND - common ground of the system
  • VCC - supply voltage - 3.3 V or 5 V
Communication with the microcontroller takes place via the I2C or SPI interface.

Elements included in the set.

Technical specifications of the module
  • Sensor type: environmental
  • Built-in chip: BME688
  • Measured parameters: temperature, relative humidity, pressure, gas content
  • Built-in artificial intelligence system
  • Communication interface: I2C and SPI
  • I2C interface address: 0x76 (can be changed to 0x77)
  • Support for modes "00" and "11" of the SPI interface
  • Module connection: 6-pin JST connector and soldering pins
  • Built-in logic converter
  • Supply voltage: 3.3 V or 5 V
  • Two mounting holes
  • Dimensions: 27 x 20 mm
Set contents
  • 1x BME688 - 4in1 environmental sensor - AI module - I2C / SPI - Waveshare 24244
  • 1x PH2.0 6-pin cable (20 cm)
Useful links
  • Manufacturer's website: Waveshare 24244
  • Module user guide
  • System diagram
  • BME688 technical documentation
  • Raspberry Pi configuration
  • Sample program code

Доставка

Доставим товар из Германии от поставщика DESTE FZ LLC курьерской службой, в отделение Почты или пункт выдачи в вашем городе. Доставка в Армению, Казахстан, Грузию и Киргизию будет осуществлена доступными службами. Вы сможете выбрать желаемый способ доставки заказа в момент его оформления. Стоимость доставки зависит от выбранного вами метода и составит от 852 руб. Заказ будет доставлен за 10-30 дней, срок зависит от выбранного города. Если вы закажете этот товар прямо сейчас, доставим его 28 мая - 17 июня.

Доставка электроники waveshare напрямую из Германии в Москву, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие города России осуществляется надежными и проверенными нами службами доставки.

Как только заказ будет отправлен к вам с нашего склада, отслеживание заказа по номеру посылки станет доступным.