CGM 801V EBI Vintage Helmet Matt Bordeaux, M

Thanks to the fifteen-years’ experience of motorcycle helmets’ production, we were able to create the 801 EBI: the first ski helmet of motorcycle derivation. Outer Shell IN ABS The outer shell is realized in printed thermoplastic, which has a minimum thickness of 3mm for the entire surface, it guarantees the maximum resistance to impact and shock dispersion. INNER SHELL IN EPS The inner protection padding is realized in two measures of expanded polystyrene at different high-performance multi-density, so to guarantee the best performance both in safety terms and fitting comfort. Specific Linings Dedicated To Sizes No annoying adjustment, the linings of the model 801 are realized in thick pads and different densities per each of the 8 available sizes, so to offer the best wearability for all the head circumferences. The inner pads are made in hypoallergenic, antibacterial, and soft-on-skin fabrics, so to offer the best comfort in any condition. The linings, the cheek pads, the neck collar and the under chin are completely removable and washable. Micrometric Buckle The micrometric buckle for the strap closure is composed of a button and a measuring strip, which allow a fast and smooth adjustment, along with a practical release. The 801 is equipped with an elastic strap loop, which Is a ring, made of elastic material, which allows to block into a folded position the excess of the strap. The 801 model boasts a double certification, bikes (CE EN1078) and skis (CE EN1077). Features: Air Stream System: - The AIR STREAM SYSTEM ventilation is made by two front air vents, air ducts inside the inner shell and rear extractors. The fresh air comes inside the front air vents of the helmet and, by passing through the specific channeling of the inner shell, arrives to the pilot. The air circulation is generated by the exploitation of the movement, which creates a negative pressure and push the inner hot air towards the rear part of the helmet, where it will be expelled through the rear air extractors. In this way the pilot will benefit from a constant air recycling inside the helmet, which always guarantees a comfortable temperature. Specific Linings Dedicated To Sizes: - No annoying adjustment, the linings of the model 801 are realized in thick pads and different densities per each of the 8 available sizes, so to offer the best wearability for all the head circumferences. The inner pads are made in hypoallergenic, antibacterial, and soft-on-skin fabrics, so to offer the best comfort in any condition. The linings, the cheek pads, the neck collar and the under chin are completely removable and washable. Double Homologation: - Do not give up on the maximum protection: the helmets of the ranges 801 are certified bikes (CE EN1078) and Skis (CE EN1077). Available Visors: - 9 different visors coloring possibilities, to offer a complete choice of category for the sun protection and for selecting the best chromatic combination. Motorcycles Conception Helmet: - OUTER SHELL IN ABS The outer shell is realized in printed thermoplastic, which has a minimum thickness of 3mm for the entire surface, it guarantees the maximum resistance to impact and shock dispersion. INNER SHELL IN EPS The inner protection padding is realized in two measures of expanded polystyrene at different high-performance multi-density, so to guarantee the best performance both in safety terms and fitting comfort. Shaped Visor: - The helmet is equipped with a shaped visor – which has the shape of eyeglasses – in anti-scratch treatment and with perimeter seal in rubber. The visor is riveted to the side mounts, and it’s fixed to the shell through metal pawls. Removable Cheek Pads: - The side cheek pads are fixed to the helmet through a plastic flap, and hooked to the strap thanks to automatic buttons, so they’re easily removable to make the helmet cooler during hot days. Air Stream System: - The AIR STREAM SYSTEM ventilation is made by two front air vents, air ducts inside the inner shell and rear extractors. The fresh air comes inside the front air vents of the helmet and, by passing through the specific channeling of the inner shell, arrives to the pilot. The air circulation is generated by the exploitation of the movement, which creates a negative pressure and push the inner hot air towards the rear part of the helmet, where it will be expelled through the rear air extractors. In this way the pilot will benefit from a constant air recycling inside the helmet, which always guarantees a comfortable temperature. Specific Linings Dedicated To Sizes: - No annoying adjustment, the linings of the model 801 are realized in thick pads and different densities per each of the 8 available sizes, so to offer the best wearability for all the head circumferences. The inner pads are made in hypoallergenic, antibacterial, and soft-on-skin fabrics, so to offer the best comfort in any condition. The linings, the cheek pads, the neck collar and the under chin are completely removable and washable. Double Homologation: - Do not give up on the maximum protection: the helmets of the ranges 801 are certified bikes (CE EN1078) and Skis (CE EN1077). Shell In Hpt: - The shell is printed by injection, the thermoplastic polymers, once cold and hardened after the printing process, grant a high mechanic resistance for the maximum protection from impacts, in a wide range of temperatures, and a high capacity to dissipate the energy deriving from an impact. Moreover, the printed shell keeps its original structure, without defornity or instability, for many years. Antiscratch Painting: - Each helmet of ours is carefully treated to obtain the desired finishing. The shell, after having been smoothed, is painted with various layers of colour and then coated with the antiscratch transparent painting. Air Stream System: - This helmet is equipped with front air vents which allows the fresh air inlet that, passing through the proper ducting in the inner shell, arrives to the rider, helping to keep fresh and oxygenated the inside of the helmet. Shaped Visor With Antiscratch Treatment: - Shaped visor in glasses form which usually covers the eyes. Treated to resist to surface scratches. Removable Inner Lining: - The removable inner lining are fixed to the inner shell with fasteners, mechanisms in hard plastic or velcro, they can be washed with mild soap. Inner Lining With Soft Fabric: - These inner lining are realised with fabric extremely soft at contact with skin, for a total comfort in every drive condition. Removable Chin Protector: - Chin protector easily removable. It is needed to protect the neck skin to avoid the contact with the chin strap. Removable Neck Collar: - The neck collar fixed to the inner shell with fasteners, zips and velcro, is an accessory studied to improve the comfort fitting and to protect the nape during colder seasons. It can be easily removed to suit the helmet also to the hotter seasons. Micrometric Buckle: - The micrometric buckle for the chin strap closing is made of a button body and by a graduated lath which allow a quick and easy adjustment together with a practical release. The micrometric buckle is, therefore, studied to obtain a quick and safe system of opening/closing and a handy and intuitive adjustment system. Goggle Loop: - Rear goggle loop: useful to fasten the goggles strap to the helmet in practical and safe way. Anti-theft Loop Ring At The Chin Strap: - Anti-theft loop ring at the chin strap: useful metallic ring to fasten the helmet to the hook under the seat of the scooter in practical and safe way. Elastic Strap Loop: - Elasticated fabric loop that allows you to lock the excess strap in the folded position. Specifications: - Weight: 750 +/- 50GR