Converter DC/AC step-up 12VDC / 230VAC 350/500W - car - Volt IPS-500 Plus

Bestseller
42765270
128 GEL
  • Brand VOLT
  • Shipping from Poland
  • Post delivery June 5
  • Shipping cost for orders to Georgia from GEL 193

Properties

Стабилизатор - Тип
step-up
Стабилизатор - Тип 2
switching
Выходное напряжение от
220.0 V AC
Выходное напряжение до
240.0 V AC

Basic information

Rated power
350 W

General characteristics

Voltage To
10.5 V
Voltage From
15.5 V

Other features

Brand
VOLT

Power

Current
depending on input

Description

Product description: DC/AC step-up converter 12VDC / 230VAC 250/500W - automotive - Volt IPS-500 Plus

IPS-500 Plusstep-upVolt IPS-500 Pluswith 12 VDCinput voltagewithcar cigarette lighterplugand 230 V AC output voltage of 350 W continuous and 500 W instantaneous power. Ideal for supplying 230 V devices if there is no direct access to the mains.

DC/AC step-up Volt converter IPS-500 Plus.

The voltage regulator producesa modified sinusoidaloutput, i.e.rectangularalternating voltage.The r.m.s. value of the waveform is identical to the r.m.s. value of the sinusoidal waveform occurring in the power network. The inverter is equipped with a number ofprotections, suchas: short-circuit, thermal, under-voltage, over-voltage, overload. The efficiency of the Volt IPS 500 Plus is 92%.

Volt IPS-500 Plus step-up converter specification
  • Battery voltage: 12 V
  • Input voltage: 10.5 V to 15.5 V DC
  • Output voltage: 225 V to 235 V AC
  • Overload power (momentary): 500 W
  • Rated power (continuous): 350 W
  • Output voltage frequency: 50 Hz (+/- 2 Hz)
  • Efficiency at full load: 92%
  • Under-voltage protection tripping threshold: 10,7 (+/- 0,3 V)
  • Operating temperature: -10°C to 40°C
  • USB socket: yes - 5 V
  • Cable with cigarette lighter plug
  • Security:
    • Short circuit protection
    • thermal - switches off the device after exceeding approx. 60°C - 70°C
    • Under-voltage: switches off the device when the input voltage is too low
    • over-voltage - switches off the device when the input voltage is too high
    • overload protection - switches off the device if it has been overloaded for more than a dozen seconds
Useful links
  • Manual