CTX 200gr Clorshock 5kg Chlorine treatment

Owing to its high solubility in water the required quantity of residual chlorine is rapidly obtained. It is especially suitable for the disinfection of a pool made of polyester or vinyl because this product doesn´t discolours these surfaces. The ease with which it dissolves in water, means the disinfection of the pool water may be automated using a metering pump. The free residual chlorine obtained in the water offers higher stability against ultraviolet light. Features: - Fast-dissolving - High water solubility makes it quick to obtain the necessary residual chlorine amount - Stabilized chlorine, long lasting action/protection - Does not modify pH Instruction For Use: - Adjust the pH correctly before applying any product to maximise its effectiveness. - Introduce the necessary dose of product inside the skimmers and then turn on the filter equipment; in this way the product will dissolve when it begins to move through the skimmers. - It is also possible to pour the dose of product equally over the surface of the swimming pool, preferably during the evening and when there are no swimmers in the pool. - The level of free residual chlorine should be between 0,5 – 2 mg/l. This level is easily determined using a chlorine and pH test, and should be measured at least twice daily. Dosage: - Initial Treatment: Add 15 grs. of ClorShock for each m3 of water. After 2 hours, fix the water pH between 7,2-7,6 using ctx 10 pH Minus solid or ctx 20 pH Plus solid. - The initial treatment will have to be repeated whenever you notice a lack of transparency in the water. - Maintenance Treatment: Once the pH level of the water has been adjusted, add from 1-3 grams of product for m3 of water daily. - This dose is merely meant as a guideline and may be modified according to differing characteristics of the pool or climate.