Cytron SmartDriveDuo MDDS30 - two-channel DC motor driver - 7V-35V/30A
- Product Code:
- 43303499
Properties
- Voltage To
- 7.0 V
- Voltage From
- 35.0 V
Features
- Channel
- 2
Other features
- Brand
- Cytron
Power
- Current
- 30 A
Description
Two-channel DC motor controller by Cytron. It is equipped with Smart Drive function supporting 4 different communication interfaces such as UART, PWM, RC and analog output, thanks to this solution the controller is ideal for building robots controlled by RC remote control. The controller works with motors supplied with voltage from 7 V to 35 V and 30 A per channel (momentary up to 80 A). The board has dimensions 101 x 96 x 42 mm.
Two-channel MDDS30 motors controller.
Two-channel motor controller - Cytron SmartDriveDuo MDDS30.The MDDS30 motor controller is equipped with SmartDriveDuo function which allows for communication with the controller via 4 different interfaces such as UART, PWM, RC (radio control) and analog output. Interface selection is made by means of a DIP switch on the board, detailed information on interface selection can be found in theusermanual. The manufacturer has prepared videos presenting control of MDDS30 module using various interfaces:
Control by means of PWM signal.
Control by means of analog signal.
Radio signal (RC) control.
Product compatible with Arduino
For a sample code and detailed information, see the user guide.
Two-channel SmartDriveDuo MDDS30 controller protectionThe module has an overcurrent protection to protect the controller from damage when the motor stops or when a motor is too large. When a motor tries to draw more current, the controller limits it to the maximum. The controller also has protection against too high a temperature. If the board temperature increases, the current limit is limited. Additionally, the controller is equipped with an under-voltage and over-voltage switch, it is used to switch off the controller output when the output voltage drops below the lower threshold or above the upper threshold.
Attention!
The controller does not have a protection against reverse polarity, please pay special attention to the way the module power supply is connected.
Specification of a two-channel motor controller - Cytron SmartDriveDuo MDDS30 - 7 V - 35 V / 30 A- Supply voltage: 7 to 35 V
- Maximum continuous current: 30 A
- Maximum instantaneous current: 80 A
- Number of channels: 2
- Security:
-
- Overcurrent
- Under-voltage
- Temperature
- Dimensions: 101 x96 x 42 mm
- Weight: 250 g
- Manufacturer's website Cytron MDDS30
- Product presentation
- Documentation
- Arduino Library
