Digital Distance Sensor 25cm - Pololu 4066

Бестселлер
46852414
3 058 ₽

Мы выстраиваем выгодные партнерские отношения с поставщиками электроники Pololu и отобрали для вас лучших производителей брендовых товаров из Европы, Америки, Турции и ОАЭ, специализируясь на аутлетах и дискаунтерах. Прямая доставка из-за рубежа до покупателя нашими логистическими решениями — это оптимизированные и экономичные решения, вы не переплачиваете в цене товара за расходы на торговые помещения и шоурумы. Заказ будет отправлен напрямую с нашего склада по указанному вами адресу, по цене недоступной для местных магазинов.

Оригинальные брендовые товары в широком ассортименте с вкусными скидками — так можно описать наш интернет магазин. Доставка заказа будет отслеживаться на всех этапах покупки и работает сразу после оплаты заказа.

  • Бренд Pololu
  • Доставка из Польши
  • Пункт выдачи СДЭК 25 мая
  • Стоимость доставки заказа в Россию от 839 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Общие характеристики

Напряжение от
5.5 V
Напряжение до
3.0 V
Датчик - расстояние от
0.1 cm
Датчик - расстояние до
25 См

Прочие свойства

EAN
5904422349080
Бренд
Pololu

Свойства

Подключение
Digital I / O

Описание

Product description: Digital distance sensor 25 cm - Pololu 4066

Small module withdistance sensorbased onLidartechnology. Digital sensor with operating rangeup to 25cm, poweredfrom 3V to 5.5V. It is equipped with one digital output that changes its state to low when an object is detected. The sensoris not able to measure distance, it only informs when it encounters an obstacle within 25 cm with an accuracy of1 mm. This sensor uses a short range Lidar module toaccurately measurethe time it takes for the emitted pulses of eye-safe infrared light to reach the nearest object and be reflected back.

Application example
  • Alternative brake light sensor and photobeam
  • Non-contact sensor for robot collision or obstacle
  • A non-contact interface element to activate a device or process
  • Counter or timer for objects as they pass by
Infrared light emitted by the sensor, captured with a camera without IR filter.
Digital distance sensor 25 cm.
Using the distance sensor

The module is equipped with 3 leads:VIN, GND and OUT.Pins are located on the board in the form of holes with a 2.54 mm raster, to which you can soldergoldpin connectors(not included). On VIN pin a voltage from3 V to 5.5 Vshould be applied, GND to ground (0 V). The OUT pin triggers low (0 V) when an object is detected and high (to VIN) when an object is not detected. TheredLEDalso lights up when an object is detected. The board also has an ENABLE pin that can be set low to put it into a low power state, which consumes about 0.4 mA of current. The ENABLE pin is pulled up to VIN by default.

There is a protective film on the sensor that must be removed before working with the module.

Jumper settings on the sensor module

There are four surface mount configuration jumpers on the board that determine its operating modes. Different versions of Pololu sensors have jumpers set appropriately in the form of 0 Ω resistors. The resistors can be soldered or bridges can be added to convert one version of the sensor to another. This sensor can be converted to any other version of irs17a according to the table below.

Pin and jumper layout of the distance sensor module.
Product Description Range max. Hysteresis Distribution Minimum update frequency Jumper settings (4321) #4066 Digital output, 25 cm 25 cm 50 mm - 100 Hz 0000 #4067 Digital output, 50 cm 50 cm 50 mm - 100 Hz 0001 Digital output, 75 cm 75 cm 50 mm - 100 Hz 0010 #4069 Digital output, 100 cm 100 cm 50 mm - 100 Hz 0011 Digital output, any detection ~130 cm - - 100 Hz 0010 #4071 PWM output, max. 130 cm ~130 cm - 1 mm (- 0.5 µs) 100 Hz (max. 110 Hz) 0101 Digital output, 125 cm 125 cm 50 mm - 30 Hz 1000 Digital output, 150 cm 150 cm 50 mm - 30 Hz 1001 Digital output, 175 cm 175 cm 50 mm - 30 Hz 1010 #4077 Digital output, 200 cm 200 cm 50 mm - 30 Hz 1011 Digital output, any detection ~300 cm - - 30 Hz 1100 #4079 PWM output, max. 300 cm ~300 cm - 2 mm (= 0.5 µs) 30 Hz (max. 33 Hz) 1101
Comparison of Pololu and Sharp sensors.
Comparison with Sharp sensor

Pololu sensors have the sameshape and leadsasSharp sensors. They are available in the same sensing ranges and in longer ranges. This means that they can be usedinterchangeably. The sensors in the newer Pololu devices aremuch thinnerthan the Sharp modules, so the zero point is about 7mm closer to the plate, and the beam angle is wider in the newer devices.

Pololu distance sensor specifications
  • Supply voltage: 3 V to 5.5 V
  • Current consumption: 30 mA (typical) when switched on, 0.4 mA when switched off
  • Maximum range: 25 cm
  • Minimum range: up to 1 mm
  • Minimum update rate: 100 Hz (10 ms period)
  • Field of View (FOV): typically 15°, may vary depending on object reflection and environmental conditions
  • Output Type: digital signal (low when object detected, high otherwise)
  • Dimensions: 21.6 x 8.9 x 3.5 mm
  • Weight: 0.4 g
>Output signal diagram.
Useful links
  • Manufacturer's website: Pololu #4066
  • Schematic diagram
  • 3D model

Доставка

Доставим товар из Германии от поставщика DESTE FZ LLC курьерской службой, в отделение Почты или пункт выдачи в вашем городе. Доставка в Армению, Казахстан, Грузию и Киргизию будет осуществлена доступными службами. Вы сможете выбрать желаемый способ доставки заказа в момент его оформления. Стоимость доставки зависит от выбранного вами метода и составит от 839 руб. Заказ будет доставлен за 10-30 дней, срок зависит от выбранного города. Если вы закажете этот товар прямо сейчас, доставим его 14 мая - 3 июня.

Доставка электроники Pololu напрямую из Германии в Москву, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие города России осуществляется надежными и проверенными нами службами доставки.

Как только заказ будет отправлен к вам с нашего склада, отслеживание заказа по номеру посылки станет доступным.