Fermion - barometric pressure sensor BMP390L - I2C/SPI - DFRobot SEN0423
Bestseller
- Product Code:
- 111100275
Out of stock
Properties
Features
- Connection
- SPI / I2C
Other features
- Brand
- DFRobot
- Transducer Type
- pressure
Description
Product description: Fermion - BMP390L pressure sensor - I2C/SPI - DFRobot SEN0423
BMP390L digital barometric pressure sensor module from Bosch. It features extremely high temperature stability, low drift, low power consumption and low noise. The maximum deviation of absolute accuracy is less than 50 Pa and the relative accuracy can be ±3 Pa (equivalent to 25 cm), which is 166.7% higher than the previous generation. The measurement range is from 300 hPa to 1250 hPa. The sensor communicates via an I2C / SPI interface. The supply voltage is 3.3 V.
BMP390L pressure sensor module.
Pressure sensor module - DFRobot Fermion.
Main features of the BMP390L pressure sensor
- High precision (absolute deviation < 50 Pa, relative accuracy < 3 Pa)
- High long-term stability (±16 Pa/year)
- Extremely high temperature stability and low drift
- Low power consumption (54 uA in sleep mode, < 650 uA during operation)
- Asset tracking and navigation (floor detection)
- Water level measurement
- Vertical speed indicator (e.g. ascent/descent speed)
- GPS navigation enhancement
- Outdoor navigation and applications
- Medical applications (e.g. spirometry)
- AR and VR applications
- Flight stabilization
Pressure Sensor Module Pinouts
The Bosch BMP390L pressure sensor module communicates using an I2C or SPI interface and is powered by 3.3 V.
- VCC - supply voltage 3.3 V
- 3V3 - 3.3 V input / output voltage
- GND - module ground
- SCL - I2C clock line
- SDA - I2C data line
- SCK - SPI clock line
- SDI - SPI data line (input)
- SDO - SPI data line (output)
- CS - SPI selection
- INT - external interrupt
Example of connection with Raspberry Pi.
Fermion - BMP390L pressure sensor - I2C/SPI - DFRobot SEN0423.
BMP390L pressure sensor specification
- Supply voltage: 3,3 V
- Current consumption: sleep mode (54 uA) / operation (357 uA to 650 uA)
- Communication interface: I2C / SPI
- I2C address: 0x77 (default) / 0x76 (option: SDO connected to GND)
- Pressure measurement range: 300 hPa to 1250 hPa
- Relative accuracy: ±0.03 hPa (equivalent to 25 cm) (@ 700 hPa to 1100 hPa, 25°C to 40°C)
- Absolute accuracy: ±0.5 hPa
- Temperature deviation coefficient: ±0.6 Pa / K (@900 hPa, 25°C to 40°C)
- Long-term stability: ±0.16 hPa / ca
- ODR accuracy: ±2 ~ ±12%
- Measurement start time: 2 ms
- Operating temperature: -40° to 85°C
- Dimensions: 15 x 20 mm
Useful links
- Manufacturer's website: DFRobot SEN0423
- User guide
- Documentation
- Diagram
- Dimensions
