General LCD IPS display 1.28 '' 240 x 240 px - for Raspberry Pi and Arduino - round - Waveshare 19192

Бестселлер
47769154
2 273 ₽

Мы выстраиваем выгодные партнерские отношения с поставщиками электроники waveshare и отобрали для вас лучших производителей брендовых товаров из Европы, Америки, Турции и ОАЭ, специализируясь на аутлетах и дискаунтерах. Прямая доставка из-за рубежа до покупателя нашими логистическими решениями — это оптимизированные и экономичные решения, вы не переплачиваете в цене товара за расходы на торговые помещения и шоурумы. Заказ будет отправлен напрямую с нашего склада по указанному вами адресу, по цене недоступной для местных магазинов.

Оригинальные брендовые товары в широком ассортименте с вкусными скидками — так можно описать наш интернет магазин. Доставка заказа будет отслеживаться на всех этапах покупки и работает сразу после оплаты заказа.

  • Бренд waveshare
  • Доставка из Польши
  • Пункт выдачи СДЭК 26 мая
  • Стоимость доставки заказа в Россию от 839 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Прочие свойства

EAN
5904422371845
Бренд
waveshare

Экран

Тип экрана
LCD IPS
Сенсорный экран
Нет
Диагональ экрана
1,28 "
Разрешение экрана
240x240px

Описание

Description of product: General LCD IPS display 1.28 '' 240 x 240 px - for Raspberry Pi and Arduino - round - Waveshare 19192

1.28 '' round display from Waveshare. The screen resolution is 240 x 240 px . It presents a clear, properly contrasted and saturated image that is displayed in the RGB range. It uses a 4-pin SPI communication interface , is compatible with controllers such as Arduino, Raspberry Pi , Jetson Nano and STM32.

Special features
  • The 1.28 '' display presents the image in the RGB range
  • It has a built-in GC9A01 chip
  • It uses the SPI bus to communicate with other modules, which means that it does not occupy the IO pins
  • Compatible with Raspberry Pi / Jetson Nano / Arduino / STM32
  • The manufacturer provides ready-made programs for display configuration with Raspberry Pi, Arduino and STM32
General LCD - 1.28 '' round display from Waveshare.

The product is compatible with Raspberry Pi and Arduino The manufacturer provides a Product Wiki page that contains a user guide and sample program code.

Connection diagram of the General display with the Arduino board.

Connection

The display has convenient outputs , which, using wires, allow it to be conveniently connected to the selected controller. It is powered with the voltage of 3.3 V / 5 V.

Pinout description
  • VCC - red - power pin (3.3 V / 5 V)
  • GND - black - ground pin of the system
  • DIN - blue - data output pin of the SPI bus
  • CLK - yellow - pin of the clock output of the SPI bus
  • CS - orange - Chip select (activated with a low state)
  • DC - green - selection pin: data / commands (high state: data; low state: commands)
  • RST - gray - RESET pin (activated with a low state)
  • BL - purple - backlight pin
Technical Specifications
  • Display type: LCD IPS
  • Resolution: 240 x 240 px
  • Pixel size: 0.135 x 0.135
  • Interface: 4-pin SPI
  • Color range: 65K RGB
  • Supply voltage: 3.3 V / 5 V
  • Built-in controller: GC9A01
  • Screen diameter: 32.4 mm
  • External dimensions: 40.4 x 37.5 mm
Kit contents
  • 1.28 '' LCD IPS display
  • PH2.0 8-pin connection cable with a length of 20 cm

Display equipped with GC9A01 controller.

A miniature screen with an unusual shape

General LCD IPS display 1.28 '' 240 x 240 px - for Raspberry Pi and Arduino - round - Waveshare 19192 differs from other screens with a modern and aesthetic design, opening up wide possibilities to designers of small devices (e.g. portable), which due to the housing dimensions cannot use classic rectangular displays.

Communication via the 4-pin SPI interface allows you to easily connect the display to almost any microcontroller or minicomputer with logic levels of 3.3 V or 5 V. The built-in GC9A01 controller is responsible for communication.

Unique round display for various applications

Round displays are associated almost exclusively with smart watches, but their range of applications can be successfully extended to any other device that requires a small screen to display colorful graphics and text.

The round General LCD IPS 1.28 '' 240 x 240 px Waveshare 19192 display can be successfully used as a local Raspberry Pi or Arduino display in both amateur and commercial projects. It will work perfectly in the construction of your own smartwatch, a stylish audio player or a futuristic portable meter (e.g. a voltmeter or a tester of electronic components).

Useful links
  • Manufacturer's website: Waveshare 19192
  • Product Wiki page

Доставка

Доставим товар из Германии от поставщика DESTE FZ LLC курьерской службой, в отделение Почты или пункт выдачи в вашем городе. Доставка в Армению, Казахстан, Грузию и Киргизию будет осуществлена доступными службами. Вы сможете выбрать желаемый способ доставки заказа в момент его оформления. Стоимость доставки зависит от выбранного вами метода и составит от 839 руб. Заказ будет доставлен за 10-30 дней, срок зависит от выбранного города. Если вы закажете этот товар прямо сейчас, доставим его 15 мая - 4 июня.

Доставка электроники waveshare напрямую из Германии в Москву, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие города России осуществляется надежными и проверенными нами службами доставки.

Как только заказ будет отправлен к вам с нашего склада, отслеживание заказа по номеру посылки станет доступным.