Gravity - BMI160 6DoF IMU - 3-axis accelerometer and gyroscope - DFRobot SEN0250

Бестселлер
111100034
1 930 ₽

Мы выстраиваем выгодные партнерские отношения с поставщиками электроники DFRobot и отобрали для вас лучших производителей брендовых товаров из Европы, Америки, Турции и ОАЭ, специализируясь на аутлетах и дискаунтерах. Прямая доставка из-за рубежа до покупателя нашими логистическими решениями — это оптимизированные и экономичные решения, вы не переплачиваете в цене товара за расходы на торговые помещения и шоурумы. Заказ будет отправлен напрямую с нашего склада по указанному вами адресу, по цене недоступной для местных магазинов.

Оригинальные брендовые товары в широком ассортименте с вкусными скидками — так можно описать наш интернет магазин. Доставка заказа будет отслеживаться на всех этапах покупки и работает сразу после оплаты заказа.

  • Бренд DFRobot
  • Доставка из Польши
  • Пункт выдачи СДЭК 11 июня
  • Стоимость доставки заказа в Россию от 867 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Напряжение от
6.0 V
Напряжение до
3.2 V

Прочие свойства

Бренд
DFRobot
Тип датчика
accelerometer, gyroscope

Свойства

Подключение
I2C

Описание

Product description: Gravity - BMI160 6DoF IMU - 3-axis accelerometer and gyroscope - DFRobot SEN0250

A 6-axisinertial sensor equipped with the Bosch BMI160 MEMS chip. The module integrates a 16-bit 3-axisaccelerometerand a 3-axisgyroscope. It is used to measure linear acceleration in the ranges± 2 g / ± 4 g / ± 8 g / ± 16g and angular velocity in the range± 125 dps / ± 250 dps / ±500dps / ± 1000 dps / ± 2000 dps. It is characterized bylow power consumptionandhighreadingaccuracy. It is used as an additional element for smartphones, tablets and other mobile devices. It can be used to count steps, as a recorder during running and other exercises. It has a built-in LDO power management circuit, works with a voltage rangefrom 3.2 V to 6 V. It usesI2Cbus to communicate with the controller module.

6-axis motion sensor IMU from DFRobot.

Product is compatible with Arduino

The manufacturer has prepared a detaileduser guidethat makes it significantly easier to start working with the module. It contains instructions for connecting the module to the controller,libraryfor Arduino IDE environment and sample program code.

The kit also includes connection cable and goldpin strip.

Special features
  • 6-axis motion sensor equipped with Bosch BMI160 MEMS chip, which is a combination of 3-axis accelerometer and 3-axis gyroscope
  • Low power consumption with high measurement precision
  • Built-in LDO for power management
  • Compatible with 3.3 V and 5 V controllers
  • Use for step counting, acceleration detection and angle of inclination applications
Kit contents
  • Gravity - BMI160 6-axis IMU sensor from DFRobot
  • I2C / UART connection cable with Gravity connector
  • 1x4 goldpin strip - 2.54 m pitch
Pinout and connection diagram

The sensor module can be connected to the controller in two ways: using theGravityconnector or solder fields. The kit includesmounting and connection componentsfor each option. Connect the components according to the following relationships:

  • VCC ("+") - supply power to the circuit in the range from 3.2 V to 6 V
  • GND ("-") - system ground
  • SCL (C) - I2C interface clock line
  • SDA (D) - I2C interface data line
  • INT1 - configurable interrupt 1 output
  • INT2 - configurable interrupt 2 output
  • SDO - I2C interface address selection
    • GND - 0x68
    • VCC - 0x69 (default)

Connection diagram of the module withDFRduinoboard, which is an Arduino equivalent. The board is not included in set, it can be purchased separately in our shop.

Module is equipped with BMI160 chip.

Technical specification of the sensor
  • Type: 6-axis motion sensor IMU
    • 3-axis accelerometer
    • 3-axis gyroscope
  • Integrated circuit: MEMS Bosch BMI160
  • Operating voltage range: 3.2 V to 6 V
  • Current consumption: < 1 mA
  • Communication interface: I2C
  • Connector: Gravity
  • Accelerometer measuring range: ± 2 g / ± 4 g / ± 8 g / ± 16 g
  • Accelerometer Zero-g Offset: ± 40 mg
  • Gyroscope Measuring Range: ± 125 dps / ± 250 dps / ±500 dps / ± 1000 dps / ± 2000 dps
  • Zero-g Gyro Offset: ± 10 dps
  • Frequency range: 25 Hz to 1600 Hz
  • Data Output: 16-bit
  • Shock Resistance: 1000 g x 200 us
  • FIFO: built-in, 1024 bytes
  • Operating temperature range: -40°C to 85°C
  • Module dimensions: 22 x 27 mm
Useful links
  • Manufacturer's website: DFRobot SEN0250
  • User guide
  • BMI160 Technical Documentation
  • Library for Arduino IDE environment
  • Schematics and dimensions of the module

Доставка

Доставим товар из Германии от поставщика DESTE FZ LLC курьерской службой, в отделение Почты или пункт выдачи в вашем городе. Доставка в Армению, Казахстан, Грузию и Киргизию будет осуществлена доступными службами. Вы сможете выбрать желаемый способ доставки заказа в момент его оформления. Стоимость доставки зависит от выбранного вами метода и составит от 867 руб. Заказ будет доставлен за 10-30 дней, срок зависит от выбранного города. Если вы закажете этот товар прямо сейчас, доставим его 31 мая - 20 июня.

Доставка электроники DFRobot напрямую из Германии в Москву, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие города России осуществляется надежными и проверенными нами службами доставки.

Как только заказ будет отправлен к вам с нашего склада, отслеживание заказа по номеру посылки станет доступным.