LIS3DH 3-axis I2C/SPI digital accelerometer - STEMMA QT - Adafruit 2809
- Product Code:
- 47897509
Properties
Other features
- Brand
- Adafruit
Description
- Supply voltage: 3 V to 5 V
- Voltage of the pins: 3 V to 5 V
- Three axes: X, Y, Z
- Communication interface: I2C (TWI), SPI
- The bus address: 0x18 or 0x19 (selected with SDO pin)
- Resolution: 10 bits
- 3 additional analog inputs for reading I2C
- Measuring ranges (configurable):
- ±2 g, ±4 g, ±8 g, ±16 g
- Pins: goldpin connectors - 2.54 mm pitch (strap included in the kit for self-soldering)
- 4 mounting holes with diameter: 2 mm
- Board sizes: 25,4 x 17,8 mm
- Weight: 1.5 g
Description
Sensor for measuring acceleration in three axes: X, Y, Z in the range of ±2 g, ±4 g, ±8 g / ±16 g. For communication with the central unit is the popular I2C or SPI bus. The module has necessary for the correct operation of the system, passive elements. Pins are holes for self-soldering of the goldpin connectors - 2.54 mm pitch (included) to connect the sensor viawires or to directly attach into the breadboard. The module also has a STEMMA QT connector that can be used to connect the sensor to the controller without soldering.
The product is compatible with Arduino
A detailed description along with sample code, can be found inthe user guide.
Pins
The sensor has pins for mounting the connectors of goldpin type - pitch of 2.54 mm, the strap is in the set for self-assembly. The board also has a STEMMA QT connector, which is an alternative connection method.
Pin
Description
Vin The module's supply voltage ranging from 3 V to 5 V. GND The ground of the system. 3Vo Regulator's output of 3.3 V with the current of 100 mA. SCL Clock line of the bus I2C (TWI) SPI SDA The data line of the I2C bus (TWI) / CFI (MOSI) SDOThe address selection of the I2C bus:
- 0x18 - default address, the pin is pulled to ground through the resistor of 10kΩ,
- 0x19 - alternate address - in order to select it, you must indicate the high status.
Selection of I2C / SPI. Pin not connected or connected to a high status, selects the I2C communication, connected to low status, it selects the SPI communication.
INTProgrammable interrupts, the details inthe documentation.
A1, A2, A3Analog pins to read the I2C bus, the details inthe documentation.
Useful links
- The website of the manufacturer: Adafruit 2809
- User manual
- The Arduino library in Github
- Documentation of LIS3DH
- Module description
- Diagram of the module