MAVIC Deemax Pro Samoa Hill 27.5´´ Boost XD MTB rear wheel 12 x 148 mm

We took the legendary performance of the Deemax Pro and improved it even more for three-time Enduro World Series champ Sam Hill. Whether you’re an enduro racer or an all-mountain ripper, you need a wheel that delivers the perfect balance of strength, stiffness and lightweight agility—so you can push it on rowdy descents and still hammer up climbs with efficiency. The Deemax Pro, weighing 1930g, gives you the confidence to nail new lines and carry more speed on technical downhill terrain. It was developed with input from top pro racers, including 2017/2018/2019 Enduro World Series champion Sam Hill. The rims are lightweight, yet also strong enough to withstand the abuses of hard-charging trail riding. Our innovative ISM 4D manufacturing process removes any unnecessary material from the rim. This process minimizes weight and reduces inertia while leaving enough material on the sidewalls and spoke bed where most of the stresses apply. The internal rim width, which affects tire shape and size, is 28mm based on the choice of our pro riders. The result is a wheel that’s strong and light for acceleration and control on the most aggressive trails. The wheel is laced with 24 Zicral spokes for maximum power and brake torque transfer. The rear hub features our fast-engaging ID 360 freehub and is compatible with any drivetrain setup. The front hub is 15x100/20x110 or 15x110 (Boost) compatible, and the rear wheel comes in 12x142 or 12x148 (Boost). Features: Ultra-responsive ride quality: - 28mm wide (internal) rims proven fastest through extensive testing with top pro enduro racers. - ISM 4D construction, Isopulse lacing and 24 Zicral spokes deliver maximum acceleration in a lightweight package. Confident handling and durability you can count on: - ISM 4D rim technology minimizes weight without sacrificing strength. - Maxtal alloy rims and Zicral spokes for added strength and durability. UST Tubeless for added traction and control: - User-friendly tubeless technology for better traction and control with reduced risk of punctures. - Wheelset ships with UST valves. Specifications: Compatibility: - Rear axle: 12mm thru axle, convertible to Quick Release with optional adapters Intended Use: - Recommended tyre sizes: 46mm to 64mm (1.8´´ to 2.5´´) - For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesnn´t exceed 120kg, bike included - ASTM CATEGORY 4 : ENDURO AND TRAIL RIDING Compatible Adapters and freewheel bodies: - Boost : Torque Caps (LV2650200) - ID360 Shimano Micro Spline alloy freewheel body (LV3990100) - Boost : 12x148 rear axle adapters (LV2510700 - Delivered with the wheel) - ID360 Sram XD freewheel body (LV3740100) - ID360 Shimano HG9 alloy freewheel body (LV3780100) - ID360 Shimano steel freewheel body (LV3790100) Rims: - ETRTO size 29´´: 622x28TSS - Internal width: 28 mm - Hookless profile - Weight reduction: ISM 4D - UST tubeless technology - Fore tapeless tubeless technology - SUP welding technology - Valve hole diameter: 6.5 mm - Tire: UST Tubeless and tubetype - Material: Maxtal Weight: - Rear 29´´ without tyre: 1025 grams Hubs: - Front bearings: adjustable sealed cartridge bearings (QRM+), Rear bearings : auto adjust sealed cartridge bearings (QRM Auto) - QRM Auto bearing preload technology - QRM+ bearing preload technology - Front and rear bodies: aluminum Spokes: - Shape: straight pull, flat - Lacing: front crossed 2, rear Isopulse - Nipples: Fore integrated aluminum - Count: 24 front and rear - Material: Zicral Versions: - Freewheel: SRAM XD, Shimano HG9, Shimano Micro-Spline - Freewheel: Shimano/Sram or XD - Hub width: Boost (front 110, rear 148) or Non-Boost (front 100, rear 135/142) - Disc standard: 6 Bolts only Technology: Maxtal aluminum alloy: - Light and strong Exclusive to Mavic, this specific aluminum alloy offers a higher strength to weight ratio than conventional 6106 alloy. UST tubeless technology: - Traction and control Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats. Zicral aluminum alloy for spokes: Light, stiff and strong A specific aluminum alloy that provides spokes with higher stiffness-to-weight ratio while being stronger. SUP welding technology: - Stronger and smoother joint Soudé Usiné Process. After tending, the rim joint is arc welded. The welded seam is then milled for a smooth finish.