Monochrome graphical OLED display 0,96 '' 128x64px - I2C/SPI - Adafruit 326

Bestseller
47897872
113 GEL
  • Brand Adafruit
  • Shipping from Poland
  • Post delivery July 11
  • Shipping cost for orders to Georgia from GEL 191

Properties

Display

Touchscreen
No
Screen resolution
128x64px
(image-) diagonal
0,96"

Other features

Brand
Adafruit

Экран

Screen Display
СОЛОМА

Description

Description: Monochrome graphical OLED display 0.96 '' 128x64px - I2C / SPI - Adafruit

Mini OLED display with a resolution of 128 x 64, with a diagonal of 0.96 inches. It is supplied with the voltage of 3.3 V. It operates with voltages of 3.3 V and 5 V, communicates through the SPI bus or I2C. The device is characterized by a high contrast, each of the white pixels is supplied separately by the control system and shines with its own light.

The product is compatible with Arduino and Raspberry Pi

The manufacturer has preparedthe manualandlibrary forArduino.

In the system Adafruit you can also findan example of a connection with the Raspberry Pi.

Connection

The display can be powered with any voltage from 3.0 V to 5.0 V. The data lines operate with a supply voltage from 3.3 V to 5.0 V. You can choose the I2C bus or SPI for communication.

 

In order to run the I2C it is necessary to close jumper SJ1, SJ2, located on the back of the board. The SPI bus is working by default. A detailed description can be found onthe website of the manufacturer.

Pin Description GND The ground of the system. 3.3 V The output from the voltage regulator is 3.3 V. VIN Supply voltage from 3 V to 5 V. DATE Data line of SDA of the I2C bus. Data line of SPI bus. CLK Line clock bus of SCL I2C. Line clock of SPI bus. SA0/ DC Change of address of the I2C bus. The data line of the SPI bus RST Reset the module. CS Device selection Chip Select of the SPI bus.

 

Specification of Monochrome graphical OLED display
  • Supply voltage: from 3.0 V to 5.0 V
  • Communication: I2C or SPI
  • The address of the I2C bus: optional: 0x3C - 0x3D
  • Connectors: hole for goldpin connectors - 2.54 mm raster (included)
  • The dimensions of the board: 38 x 29 mm
  • Weight: 8.5 g

 

Useful links
  • The website of the manufacturer: Adafruit 326
  • Example of display connection to an Arduino
  • Example of connecting the display to the Raspberry Pi