LED strip RGB WS2812 5050 x 8 LEDs - 53mm - soldered connectors
- Product Code:
- 42762805
Properties
- led type
- WS2812B
- Led Lens
- Четкий
- Promotion
- BF40
- LED Wavelength
- RGB
- Светодиодный - цветной
- RGB
- Светодиодно - цифровой
- yes
Basic information
- Rated power
- 1.0 W
General characteristics
- LED - светодиоды
- 8
Other features
- Brand
- OEM
Description
A strip consisting of8 individually addressed RGB 8080 LEDswith integrated controller. One microcontroller pin, e.g.Arduino, is sufficient to operate the module. The strip is 53 mm long.Each diode draws up to 20 mAofcurrent, whichin this case gives a total value of about 160 mA.The strip can be supplied with voltagefrom 4 V to 7 V. The module has soldered-inmale pins.
LED strip RGB WS2812 with soldered-in connectors.
The used communication protocol allows for serial connection of the diodes. Another chain should be connected to the output connector, connecting 4-7VDC, GND and DOUT with DIN respectively. The manufacturer notes that when using more than 500 diodes, the ArduinoUnoRAM memory may not be sufficient.
Connecting the module The device has four leads:- GND- module weight
- 4-7VDC- supply voltage, 20 mA of current per diode
- DIN- digital control signal from a microcontroller
- DOUT- output for connecting the next ring
Module outputs.
Product compatible with Arduinoand RaspberryPi
The product works with NeoPixel libraries from Adafruit:
- Arduino library on GitHub websitewithconnectionexamples,
- example of a connectionto Raspberry Pi with a code.
We also offer other modules with WS2812 diodes.
RGB LED strip specification- Supply voltage: 4 V to 7 V
- Current consumption: approx. 20 mA for one diode
- LEDs used: RGB LED WS2812(documentation)
- Number of diodes: 8
- Soldering male connectors
- Size of the slat: 53 x 10 mm
- Arduino library at GitHub
- Example of connection to Raspberry Pi
- Example project in Adafruit system
- Documentation for WS2812B diode
