Pololu Step-Up/Step-Down Voltage Regulator S7V7F5 - 5V 1A - soldered connectors

Бестселлер
47399398
1 646 ₽

Мы выстраиваем выгодные партнерские отношения с поставщиками товаров для строительства и ремонта Pololu и отобрали для вас лучших производителей брендовых товаров из Европы, Америки, Турции и ОАЭ, специализируясь на аутлетах и дискаунтерах. Прямая доставка из-за рубежа до покупателя нашими логистическими решениями — это оптимизированные и экономичные решения, вы не переплачиваете в цене товара за расходы на торговые помещения и шоурумы. Заказ будет отправлен напрямую с нашего склада по указанному вами адресу, по цене недоступной для местных магазинов.

Оригинальные брендовые товары в широком ассортименте с вкусными скидками — так можно описать наш интернет магазин. Доставка заказа будет отслеживаться на всех этапах покупки и работает сразу после оплаты заказа.

  • Бренд Pololu
  • Доставка из Польши
  • Пункт выдачи СДЭК 23 мая
  • Стоимость доставки заказа в Россию от 1 046 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Стабилизатор - Тип
step-up/down
Стабилизатор - Тип 2
switching
Выходное напряжение от
5.0 V
Выходное напряжение до
5.0 V

Вес и размеры

Длина
12 mm
Высота
3 mm
Ширина
9 mm

Общие характеристики

Напряжение до
2.7 V
Напряжение от
11.8 V

Прочие свойства

EAN
5904422303679
Бренд
Pololu

Энергопитание

Сила тока
1 A
Номинальное выходное напряжение
5.0 V

Описание

Product description: Polol S7V7F5 - step-up/step-down converter - 5 V 1 A - soldered-in connectors.

A small module of the pulse inverter, supplied with voltage from2.7 V to 11.8 V. Output voltage is set to5 V, maximum output current is1 A. The module dimensions are: 9 x 12x 3 mm.The inverter is used to supply circuits operating at 5 V. The circuit has awide range of input voltages, which makes it ideal for battery-powered constructions. Theuse ofS7V7F5ensures stability of power supply during the whole battery discharge cycle. In order to increase reliability, the module is equipped withshort-circuitprotectionand anautomaticpower cut-offcircuitwhen thepermissible operating temperatureis exceeded. The module has soldered-ingoldpinmaleconnectors.

In our offer there is also a set for building a chargerfor smartphones together with an online manual.

The way of connecting the inverter

The module is extremely simple to use, has three basic outputs:

  • VIN- input voltage from 2.7 V - 11.8 V. If the lower module does not switch on, the higher one can damage the system.
  • GND- ground potential.
  • VOUT- 5 V output voltage.

The permitted input voltage range is 2.7 V to 11.8 V. At a lower value, the controller will not switch on. A higher voltage may damage the system.

The output voltage is set to 5 V, but can be up to 5.2 V with no or low load.

The connectors are properly signed on the board.Outputs are 2.54 mm (popular goldpin connectors). The module can be plugged into acontactboard,connected with wiresor soldered intoa dedicated PCB.

Converter output current

The maximum current that can flow through the system depends on the input voltage. This dependence is shown in the diagram below:

The maximum output current as a function of the input voltage.

Efficiency of the S7V7F5 inverter

This parameter is particularly important for battery operation when it is important to keep the system running as long as possible on a single charge. The efficiency of the inverter depends on the flowing current and the input voltage (graph below). On average, it is between 85 % and 95 %, allowing the maximum use of battery power.

The efficiency of the inverter depends on the current consumed.

Voltage jumps (pins)

In electronic circuits the starting current may cause the occurrence of so-called pins, i.e. sudden voltage surges to a value above a set level. If the amplitude of the pins exceeds the permissible value of the regulator, it can be destroyed. Therefore, if the circuit will be supplied with voltage above 9 V or the load will have high inductance, we recommend to solder a capacitor of 33 uF / 25 V or higher as close to the circuit as possible between VIN and GND.

Polol S7V7F5 inverter specifications
  • Input voltage: 2.7 V to 11.8 V
  • Maximum output current:
    • 1 A (step-down)
    • 0.5 A (step-up)
  • Output voltage: 5 V
  • Temperature protection
  • Soldering goldpin male connectors
  • Dimensions: 9 x 12 x 3 mm
  • Weight: 0.5 g (without connectors)
Useful links
  • Manufacturer's website - Polol #2119

Доставка

Доставим товар из Германии от поставщика DESTE FZ LLC курьерской службой, в отделение Почты или пункт выдачи в вашем городе. Доставка в Армению, Казахстан, Грузию и Киргизию будет осуществлена доступными службами. Вы сможете выбрать желаемый способ доставки заказа в момент его оформления. Стоимость доставки зависит от выбранного вами метода и составит от 1 046 руб. Заказ будет доставлен за 10-30 дней, срок зависит от выбранного города. Если вы закажете этот товар прямо сейчас, доставим его 12 мая - 1 июня.

Доставка товаров для строительства и ремонта Pololu напрямую из Германии в Москву, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие города России осуществляется надежными и проверенными нами службами доставки.

Как только заказ будет отправлен к вам с нашего склада, отслеживание заказа по номеру посылки станет доступным.