PROTEST Gatewood jacket L

Here is the PRTGATEWOOD. Made for adventure, this jacket is the perfect piece of outerwear. The PRTGATEWOOD has a short length and a regular fit. With 20K waterproofness and 20K grs/M2 breathability, the jacket will make sure that no water gets in from the outside while allowing moisture to disperse away from the inside of the jacket. The front zipper is waterproof. There are four pockets at the front. The top two pockets can also function as extra ventilation by simply leaving the pocket open. The inside of these top pockets are made from mesh. There are reflective details to make sure you’re seen when the visibility is poor. The cuffs are adjustable. As part of our efforts to Green Up, this jacket is made using recycled polyester, a fabric that is not just sustainable but also provides durability and stretch. This jacket is also PFC-free. If you would like to add an insulating layer under this jacket, check out the PRTSHAFFER, our quilted insulation jacket. Whatever the weather, the PPRTGATEWOOD has got you covered. High collar: - This is a garment with a high collar, perfect for keeping the elements at bay. The collar can partially cover the face. Regular fit: - This garment has a regular fit. Geotech 20.000 series: - This number tells you how waterproof your garment is. If the fabric is 20k or 20 000 mm, this means you can place a square tube with inner dimensions of 30mm x 30mm over the garment´s outer fabric and you could fill it with water to Water repellent zippers: - These zippers repel light rain and snow and decreases dry times. Specifications: - 100% Polyester Care: - Avoid softner - Do not bleach - Do not dry clean - Do not iron - Do not soak - Do not tumble dry - Do not wring - Wash inside out 30°C - Wash separately