Soldering station 2in1 hotair and tip-based Yihua 852D+ - compressor - 600W
Bestseller
- Product Code:
- 47170577
Out of stock
Properties
- Promotion
- 2
- Voltage From
- 240 V
- Паяльник - Вентилятор
- No
- Припой - Горячий воздух
- yes
- Кондиционер паяного типа
- Цифровой
- Припой - показания реальной температуры
- yes
Basic information
- Rated power
- 600 W
General characteristics
- Voltage To
- 220 В
Other features
- Brand
- YIHUA
Power
- Rated voltage
- 230 V
Description
Description
Yihua 852D+ is a 2in1 device, that is hot air iron and tip-based soldering station with power of 60 watts. Built-in dual LED displays is informing about the set temperature. The system is ESD Safe and protects the soldered items from damage.
Check out our offer of additional tips!
Specification- Power supply: AC 230V, 50 Hz (network)
- The system is ESD Safe
- Included 3 pieces of round nozzle with a diameter of 2 mm, 4.4 mm, 7 mm
- Continuously adjustable temperature of hot air in the range from 100 °C to 500 °C
- Two LED displays, showing the set temperature
- Temperature setting with knob
- Fan performance: up to 28 l/min
- Infinitely adjustable air supply with regulator
- The blow of air is provided through compressor
Soldering Iron
- Smooth adjustment of temperature of the iron in the range of 200-500 °C
- The power of the iron 60W
Included
- Soldering station Yihua 852D+
- Stand for hotair iron
- Stand for tip-base soldering iron along with a sponge to clean the soldering tip
- Soldering iron
- Hotair nozzles:
- round with a diameter of 2 mm
- round with a diameter of 4.4 mm
- round with a diameter of 7 mm
- Power cable
First run
- You should not run the device immediately after delivery.
- Equipment must remain for about 12 hours at room temperature before switching on.
- All complaints caused by running of the equipment too soon will be denied.
- You must completely remove the screw/screws from the bottom of the station if the compressor is the source of air supply. These screws are marked in red (1 or 3 screws depending on model).
Our range of accessories for soldering:
- soldering tin of various diameters
- fluxes and rosins
- braids to remove excess tin
- suckers
- soldering tips
- tweezers, holders, magnifying glass
- sponges and cleaners