Properties
- StarterKit - тема
- Raspberry Pi
- StarterKit - модуль
- Raspberry Pi
Other features
- Brand
- Raspberry Pi
Description
A set of elements to help you get started with the Raspberry Pi Pico W module. In addition to the Raspberry Pi Pico W with soldered male connectors, the set includes such elements as: LEDs, sensors, relay, resistors, OLED display, breadboard and buttons. The set has been closed in a handy organizer , which makes it easy to store and carry.
The kit also includes a large breadboard and connecting cables, with which it is possible to build projects without soldering. Buttons with LEDs and an OLED screen with a diagonal of 0.96 "allow you to create a simple user interface. The sensors included in the set allow the user to read data from the environment and send them to the created network interface, web server. The included relay will allow you to create automation projects and IoT by remotely controlling lighting or other higher voltage devices.
Raspberry Pi Pico W is a small module equipped with the proprietary Raspberry RP2040 microcontroller. The RP2040 microcontroller is a dual-core ARM Cortex M0 + chip clocked at 133 MHz, equipped with 264 KB of SRAM and 2 MB of Flash memory. WiFi 2.4 GHz IEE 802.11 b / g / n wireless communication is available thanks to the CYW43439 chip. The Raspberry Pi Pico W board has 26 GPIO pins , which work with a voltage of 3.3 V. On the module you can also find a built-in temperature sensor. The Raspberry Pi Pico is programmed in C / C ++ and MicroPython via the microUSB connector.
14
1.8 m microUSB cable - used to connect the Raspberry Pi Pico W to a computer. 15 PIR sensor - enables motion detection. 16 Basket for 3 AA batteries - the Raspberry Pi Pico W module can be powered by 3 AA batteries. 17 4-channel logic level converter - Raspberry Pi Pico pins work with a voltage of 3.3 V, using the converter, you can change the voltage of the elements from 5 V to 3.3 V. 18 AA battery 4 pcs . - they can be used to power the Raspberry Pi Pico. 19 Power module for contact plates - the board allows you to power elements connected to the contact plate, which require a voltage of 5 V / 3.3 V. twenty Switching power supply 12 V / 2.5 A - allows you to power the power supply module for contact plates.21
Organizer for carrying the set.- Manufacturer's website
- Documentation RP2040
- Raspberry Pi Pico W documentation
- The fritzing facility
- Internet connection guide
- Design files RP2040
- Pico C SDK
- Pico Python SDK
- User Guide
- GitHub repository - Pico SDK
- GitHub repository - sample codes
- MicroPython - Thonny development environment