Step-Up/Step-Down Voltage Regulator S13V20F5 - 5V 2A - Pololu 4085

Бестселлер
53414826
2 627 ₽

Мы выстраиваем выгодные партнерские отношения с поставщиками товаров для строительства и ремонта Pololu и отобрали для вас лучших производителей брендовых товаров из Европы, Америки, Турции и ОАЭ, специализируясь на аутлетах и дискаунтерах. Прямая доставка из-за рубежа до покупателя нашими логистическими решениями — это оптимизированные и экономичные решения, вы не переплачиваете в цене товара за расходы на торговые помещения и шоурумы. Заказ будет отправлен напрямую с нашего склада по указанному вами адресу, по цене недоступной для местных магазинов.

Оригинальные брендовые товары в широком ассортименте с вкусными скидками — так можно описать наш интернет магазин. Доставка заказа будет отслеживаться на всех этапах покупки и работает сразу после оплаты заказа.

  • Бренд Pololu
  • Доставка из Польши
  • Пункт выдачи СДЭК 25 мая
  • Стоимость доставки заказа в Россию от 1 023 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Напряжение до
2.8 V
Напряжение от
22.0 V
Стабилизатор - Тип
step-up/down
Стабилизатор - Тип 2
switching
Выходное напряжение от
5.0 V
Выходное напряжение до
5.0 V

Прочие свойства

Бренд
Pololu

Энергопитание

Сила тока
2 A

Описание

Product description: S13V20F5 - step-up/step-down converter - 5V 2A - Pololu 4085

A small step-up / step-down voltage conver ter with 5V output voltage and 2A current capacity. The module can be supplied with voltage from 2.8 V to 22 V. Step-up / step-down converters are used in projects where there are voltage variations due to the use of batteries, for example. The efficiency of the regulator is between 85% and 95% and can deliver between 1 A and 2.5 A depending on the input voltage. The module has undervoltage lockout, output overvoltage protection, and overcurrent protection. An over-temperature shutdown function also helps prevent overheating damage, and a soft-start function limits the inrush current and gradually increases the output voltage during startup.

5 V / 2 A step-up / step-down converter.
5 V / 2 A converter.
Main features of the step-up / step-down converter
  • Input voltage: from 2.8 V to 22 V
  • Output voltage: 5 V with 3% accuracy
  • Typical maximum output current: 1 A to 2.5 A, depending on the input voltage
  • Typical efficiency: 85% to 95%, depending on input voltage and load
  • Typical idle current: 10 mA to 20 mA no-load
  • Input undervoltage lockout and input surge protection
  • Soft-start function limits inrush current and gradually increases output voltage
  • Output current limitation to 5 A
  • Overcurrent protection and overheat cut-off
  • Fixed switching frequency: ~500 kHz
  • Compact size: 8.9 x 12.1 x 5.6 mm
Module pinouts

The module has three pinouts: input voltage (VIN), ground (GND) and output voltage (VOUT). The input voltage (VIN) connector supplies the inverter with power from 2.8 V to 22 V. The VOUT connector is the 5 V output from the inverter. A goldpin solder strip is included in the kit. You can use it to plug the module directly into the pin board.

The converter connected to the pin board.
Efficiency of the Pololu converter.
Typical efficiency of the inverter

The efficiency of a voltage regulator module is denoted as (power output) / (power input), it is an important measure of its performance, especially when it comes to battery life or heat generation.

Maximum continuous output current

The maximum output current achieved by an inverter depends on the input voltage, as well as other factors such as ambient temperature, airflow, and heat absorption. The graph shows the maximum output currents that the controller can deliver continuously at room temperature, without airflow or additional heat dissipation.

Maximum output current.
Current draw.
Resting current of the system

The resting current is the current that the inverter uses to power itself, and the graph shows this as the input voltage.

Pololu step-up / step-down converter module specifications
  • Input voltage: 2.8 V to 22 V
  • Output voltage: 5 V
  • Continuous output current: typical 2 A
  • Maximum resting current: 20 mA
  • Dimensions: 8.9 x 12.1 x 5.6 mm
  • Weight: 0.8 g
Goldpin connectors included.
Useful links
  • Manufacturer's website: Pololu #4085
  • Dimensions

Доставка

Доставим товар из Германии от поставщика DESTE FZ LLC курьерской службой, в отделение Почты или пункт выдачи в вашем городе. Доставка в Армению, Казахстан, Грузию и Киргизию будет осуществлена доступными службами. Вы сможете выбрать желаемый способ доставки заказа в момент его оформления. Стоимость доставки зависит от выбранного вами метода и составит от 1 023 руб. Заказ будет доставлен за 10-30 дней, срок зависит от выбранного города. Если вы закажете этот товар прямо сейчас, доставим его 14 мая - 3 июня.

Доставка товаров для строительства и ремонта Pololu напрямую из Германии в Москву, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие города России осуществляется надежными и проверенными нами службами доставки.

Как только заказ будет отправлен к вам с нашего склада, отслеживание заказа по номеру посылки станет доступным.