Step-Up/Step-Down Voltage Regulator S9V11F5 - 5V 1,5A - Pololu 2836

Бестселлер
47399396
1 751 ₽

Мы выстраиваем выгодные партнерские отношения с поставщиками товаров для строительства и ремонта Pololu и отобрали для вас лучших производителей брендовых товаров из Европы, Америки, Турции и ОАЭ, специализируясь на аутлетах и дискаунтерах. Прямая доставка из-за рубежа до покупателя нашими логистическими решениями — это оптимизированные и экономичные решения, вы не переплачиваете в цене товара за расходы на торговые помещения и шоурумы. Заказ будет отправлен напрямую с нашего склада по указанному вами адресу, по цене недоступной для местных магазинов.

Оригинальные брендовые товары в широком ассортименте с вкусными скидками — так можно описать наш интернет магазин. Доставка заказа будет отслеживаться на всех этапах покупки и работает сразу после оплаты заказа.

  • Бренд Pololu
  • Доставка из Польши
  • Пункт выдачи СДЭК 27 мая
  • Стоимость доставки заказа в Россию от 1 022 ₽

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Напряжение до
2.0 V
Стабилизатор - Тип 2
switching
Выходное напряжение от
5.0 V
Выходное напряжение до
5.0 V

Вес и размеры

Длина
12 mm
Высота
4 mm
Ширина
8 mm

Общие характеристики

Promotion
BF30
Напряжение от
16.0 V
Стабилизатор - Тип
step-up/down

Прочие свойства

EAN
5904422305796
Бренд
Pololu

Энергопитание

Сила тока
1.5 A
Номинальное выходное напряжение
5.0 V

Описание

Product description: S9V11F5 - step-up/step-down converter - 5 V 1,5 A - Pololu 2836

The converter is used to supply circuits operating at 5 V. The circuit has a wide range of input voltages, which makes it ideal for battery-powered designs. Application of S9V11F5 provides stability of power supply during the entire cycle of battery discharge. In order to increase reliability, the module is equipped with short-circuit protection and automatic power cut-off when the permissible operating temperature is exceeded.

We also offer a set to build a smartphone charger with on-line manual.

Directions for use

The module is very simple to use, it has three basic pins:

  • VIN - input voltage from 2 V to 16 V. With lower voltage module will not turn on, higher can damage the system.
  • GND - ground potential.
  • VOUT - output voltage of 5 V.

Permissible input voltage range is from 2 V to 16 V. If the value is lower, the regulator will not switch on. Higher voltage can damage the system.

The output voltage is set to 5 V, but can be up to 5.2 V with no or low load.

The connectors are properly signed on the board. The pinout is 2.54 mm (goldpin connectors). The module can be plugged into a contact board, connected via wires or soldered into a dedicated PCB.

Output current

The maximum current that can flow through the system depends on the value of the input voltage. This relationship is shown in the diagram below:

Maximum output current as a function of input voltage.

Efficiency of the converter

This parameter is especially important with battery power supply, when it is important for the system to work as long as possible on a single charge. The efficiency of the converter depends on the current flow and the input voltage (the graph below). On average, it is on the level of 85-95%, which allows to use practically maximum energy from the battery.

Efficiency of the converter depending on the current consumed.

Voltage jumps (pins)

In electronic circuits, the starting current can cause so-called spikes, which are sudden spikes in voltage to a value above a predetermined level. If the amplitude of the spike exceeds the regulator's allowable value, the regulator may be destroyed. Therefore, if the circuit will be supplied with voltage above 12 V or the load will have high inductance, we recommend soldering a capacitor of 33 µF / 20 V or higher as close as possible to the circuit between VIN and GND.

Specification of the S9V11F5 converter
  • Input voltage: from 2 V to 16 V
  • Maximum output current:
    • 1.5 A (step-down)
    • 0.8 A (step-up)
  • Output voltage: 5 V
  • Temperature protection
  • Dimensions: 8 x 12 x 4 mm
  • Weight: 0.5 g (without connectors)
Useful links
  • Manufacturers website - Pololu #2836
  • Module dimensions

Доставка

Доставим товар из Германии от поставщика DESTE FZ LLC курьерской службой, в отделение Почты или пункт выдачи в вашем городе. Доставка в Армению, Казахстан, Грузию и Киргизию будет осуществлена доступными службами. Вы сможете выбрать желаемый способ доставки заказа в момент его оформления. Стоимость доставки зависит от выбранного вами метода и составит от 1 022 руб. Заказ будет доставлен за 10-30 дней, срок зависит от выбранного города. Если вы закажете этот товар прямо сейчас, доставим его 16 мая - 5 июня.

Доставка товаров для строительства и ремонта Pololu напрямую из Германии в Москву, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие города России осуществляется надежными и проверенными нами службами доставки.

Как только заказ будет отправлен к вам с нашего склада, отслеживание заказа по номеру посылки станет доступным.