Touch Screen- capacitive AMOLED 5,5'' 1080x1920px HDMI + case for Raspberry Pi 4B/3B+/3B/Zero + case - Waveshare 17605

High quality touch screen, capacitive Waveshare. Made in AMOLED technology, the diagonal of the screen is 5.5" and its resolution is 1080 x 1920 px. The shell of the screen was made of tempered glass with a hardness of 6H, supports up to 5 touch points simultaneously. It communicates through HDMI and USB interfaces. It is enclosed in a casing made with 3D printing technology, which will also accommodate a Raspberry Pi. The case has numerous ventilation holes and a fan.

The set includes adapters, prototypes, a board and a set of screws.

The screen should be connected to the Raspberry Pi minicomputer via the included cables: HDMI and microUSB or suitable adapters. The HDMI connector transfers the image, while the USB port receives the touch interface data.

The screen works with Raspbian system without any drivers installation. However, to properly display the image you need to change the resolution in the configuration file. To do this, open the config.txt file with the command:

and then at the end of it add following instructions:

After saving the file and restarting Raspberry, image and touch function should work properly.

Detailed description of the connection can be found on the manufacturer's website.

1. Raspberry Pi connectors.

2. Cooling fan air vent.

3. Raspberry Pi connectors.

Screen dimensions.

• Type: AMOLED
• Type of touch: capacitive, 5-point
• Surface: tempered glass 6H
• Diagonal: 5.5"
• Resolution: 1080 x 1920 px
• Communication: HDMI + USB
• Viewing angle: 170°
• Brightness: 360 cd/m2
• Housing: 3D printing
• Colour: orange
• Dimensions: 144,26 x 78,66 mm

• AMOLED 5.5" touch screen
• HDMI adapter
• USB adapter
• Screw set
• Case
• 5V fan

We offer excellent hardware from Waveshare company - it is a touch screen designed to work with Raspberry Pi. The display is made in AMOLED technology, so the image is extremely bright, saturated, and the blacks are deep.

The layer responsible for touch functions is made using capacitive technology, which is currently the most commonly used technology in high-end smartphones. As a result, viewing and using the touch functions of this device connected to Raspberry Pi is very comfortable and provides a pleasant visual experience.

It is worth noting that the offered screen for Raspberry Pi is placed in a special case, in which the manufacturer has also provided space for the minicomputer itself. This makes the combined devices ultimately form a single device that is practical to use.

The Waveshare display for Raspberry Pi is also equipped with a special coating made of tempered glass to protect the device from possible impacts. The connection is made via HDMI and USB ports.

• Manufacturer's website: Waveshare
• Wiki - manufacturers guide
• Manual
• 3D drawing