Filament Fiberlogy Refill Easy PLA 1,75mm 0,85kg - Vertigo

Description: Filament Fiberlogy Refill Easy PLA 1,75 mm 0,85 kg - Vertigo

Refill EasyPLAinsert in blackwith glitter.It is designed for all3D printersworking inFFF/FDMtechnology, which do not have protection against the use of filaments from other manufacturers.Filamentsfrom theRefillseries do not have a reel, which allows to reduce the number of produced disposable plastic packaging. Replacement for the classic spools are reusable spools, which can be printed out on their own. The diameter of a single filament thread is 1.75 mm and the weight of the printing insert is 850 g.

In our offer of filaments you will also find other materials and colors.

Environmentally friendly operation

The Refill series has no disposable spools. Instead we can use reusable Masterspool reels. Such reels can be printed by ourselves, using theRichPap user'sfinisheddesign. The absence of a reel is primarily a matter of protecting the environment by minimising plastic waste from the printing process. Lack of spools also translates into a lower price of the filament,because the whole product has less weight than standard cartridges.

Easy PLA filament without spool.

Easy PLA features

Easy PLA material is distinguished by its strength, low material shrinkage. It emits a low odour during 3D printing. The filter is biodegradable and waterproof.

Suggested printing parameters of the Easy PLA filter Printing temperature From 200°C to 230°C Table temperature From 50°C to 70°C Cooling the printout Recommended Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. Easy PLA pillar specification Parameter Scope Diameter of pillar 1.75 mm Dimensional tolerances of the philanthropy +/- 0,02 mm Colour Black with glitter Printing temperature From 200°C to 230°C Table temperature From 50°C to 70°C Moisture absorber Yes Vacuum packing Yes Roundness +/- 0.01 mm Packaging dimensions 205 x 205 x 90 mm Net weight 0.85 kg

Properties of the Easy PLA pillar.

Useful links

• Fiberlogy manufacturer's website
• What is 3D printing?
• Philips in 3D printing
• Product specifications