M5Atom Lite - developer module with programmable button - ESP32
- Product Code:
- 42767510
Properties
Features
- USB ports quantity
- 1
General characteristics
- UC - I2C
- yes
- UC - USB
- USB C
- UC - WiFi
- yes
- UC - UART
- yes
- UC - ядро
- ESP-32
- Voltage To
- 5.0 V
- UC - Разъем
- USB typ C
- Voltage From
- 5.0 V
- UC - Вспышка
- 4 MB
- UC - Bluetooth
- yes
- UC - microcontroller
- ESP-32, ESP32
Operational conditions
- Operating temperature range
- 0 - 40 °C
Other features
- Brand
- M5Stack
Performance
- Product Type
- Модули для микрокомпьютера
Power
- DC input voltage
- 5 V
Processor
- Processor cores
- 2
- Processor cache
- 520 KB
- Processor frequency
- 240 MHz
Processor special features
- UART
- Yes
Storage
- The amount of RAM
- 4 MB
Weight & dimensions
- Width
- 24 MM
- Depth
- 24 mm
- Height
- 10 mm
- Weight
- 0.012 kg
Description
[ID]
Miniature main module withRGB LEDand button. The device's capabilities can be easily expanded with additionalATOMseries modules or Grove compatible sensors. The module is based on theESP32-PICOchip, which also enables communication usingWi-FiandBluetooth. For power supply and programming the device uses theUSB Cport located on the housing.
M5Atom Lite based on ESP32.
Miniature size of the device allows to use it in virtually any project.
- Module based onESP32-PICO
- 4 MBintegratedSPI Flash memory
- Compatible withGrove sensors
- Wi-Fi and Bluetooth communication
- Programmable button
- Built-in infrared diode
- GPIO connector for connecting additionalATOM modules
- Programmable with Arduino IDE,UIFlowand MicroPython
To work with the module you will need a USB cable, which will be used to program and power our device. To power the device we can also useATOM TailBatextensions, which act as a kind of powerbank. For proper communication between the module and the computer you will also needCP210Xdriver, whose installation wasdescribed by the manufacturer. The manufacturer also providesEasy LoaderandM5Burnerprograms using firmware upload to our device.
Graphicaldevelopment environmentprepared by the manufacturer.
GPIO connectors for connecting additional modules extending M5Atom Lite capabilities.
Thanks to its miniature size, the device can be successfully used inintelligent homesystems and intelligent toys and robots. The process of connecting sensors and extensions to the device is very simple. Grove andGPIOconnectors on the back of the device are used for this purpose. Thanks to the use ofGroveconnectors by the manufacturer we can also use sensors fromGrove system. Working with the device does not require from us knowledge of coding, all functions of the system can be programmed using UIFlow, which is an original,graphical programming languagecreated forM5Stackdevices.
Technical Specification- Controller:ESP32-PICO,
- Flash memory: 4
- Power supply: 5 V / 500 mA
- Connectors: GPIO, USB C, Grove
- Operating temperature: 0°C to 40°C
- Dimensions: 24 x 24 x 10 mm
- Weight: 3 g
- Product page: M5StackC008
- Module documentation
- Botland blog entry - Welcome to the M5Stack Atom series