Module with USB A and USB type C sockets - SB Components 25756

The module is equipped with USB A and USB C female connectors with 2.54 mm pitch solder pads. It allows for easy prototyping of devices with a USB interface, including: on contact boards. All 4 pins are provided for the USB Type A connector, and 6 pins for the Type C connector. Thanks to the presence of the CC1 and CC2 lines, it is possible to use additional functionalities - e.g. the USB Power Delivery standard, i.e. powering the connected devices from the USB connector. The soldering pads have been labeled to make it easier to connect the board. The module allows for cooperation in accordance with the USB 2.0 standard.

Module with USB A, USB C sockets - SB Components 25756.

USB A, USB C connectors of the module.

• USB-A:
  • 5V - main power line
  • DM - USB data transmission line (D-)
  • DP - USB data transmission line (D+)
  • GND - system ground
• USB-C:
  • GND - system ground
  • 5V - main power line
  • DP - USB data transmission line (D+)
  • DM - USB data transmission line (D-)
  • CC1 - interface configuration line
  • CC2 - interface configuration line

• Type: USB adapter
• Connector type: USB A, USB C
• Supported standard: USB 2.0
• Number of pins: 10
• Pin pitch: 2.54 mm

• 1 x Module with USB A, USB C sockets - SB Components 25756

Elements included in the set.