Screen DPI - LCD IPS 7'' 1024x600px for Raspberry Pi - Waveshare 12885

Screen Waveshare 7 " for the Raspberry Pi with a resolution of 1024 x 600 px. Works with any 40-pin version of theRaspberry Pi via the GPIO pins and DPI interface (Parallel Display Interface). The device does not have touch function.

The device communicates through GPIO pins with an adapter.

All items are included in the package.

In order to run screen, you must connect the device to a Raspberry Pi using the included adapter GPIO. The device communicates through the interface DPI.

Example of connecting the screen to the Raspberry Pi.

The screen works with the latest operating system Raspbian, Ubuntu or OSMC. However, in order that the screen displays the picture properly, you should change the resolution in the configuration file. To do this, open the file config.txt with command:

• sudo nano /boot/config.txt

and then at the end, add the following statements:

• dtoverlay=dpi24
• enable_dpi_lcd=1
• display_default_lcd=1
• dpi_group=2
• dpi_mode=87
• dpi_output_format=0x6f005
• hdmi_cvt 1024 600 60 6 0 0 0

After saving the file and reboot the raspberry, and switching on the backlight, the image should work properly.

A detailed description of connection can be found onthe website of the manufacturer.

• Type: IPS screen with DPI interface
• Diagonal: 7 "
• Resolution 1024 x 600 px
• Works withRaspberry Piversion 4B, 3B+, 3B, 2B, zero, Zero W
• The ability to disable the backlight
• Screen dimensions: 164 x 97 mm

The set also includes a mount for the screen.

• Screen 7", 1024 x 600 px
• Adapter GPIO
• Adapter for tape
• Connecting tape
• Mount on the screen

• The manufacturer's website
• Wiki - guide from manufacturer
• Documentation of display
• Scheme of GPIO adapter
• The scheme of the adapter for the connecting tape
• A series of guides for the Raspberry Pi
• Raspberry Pi hardware