A-Star 32U4 Mini SV - Atmega32u4 module - Pololu 3145

Bestseller

Product Code:: 42762812

A-Star 32U4 Mini SV - Atmega32u4 module - Pololu 3145

119 GEL

Brand Pololu
Shipping from Poland
Post delivery July 21
Shipping cost for orders to Georgia from GEL 117

Properties

UC - I2C: yes
UC - USB: microUSB
UC - RAM: 2,5 kB
UC - A/C: 10-bit
UC - PWM: 7
UC - UART: yes
UC - ядро: 8-bit AVR, 1. Single Core
Voltage To: 5.0 V
UC - EEPROM: 1 kB
UC - Вспышка: 32 kB
UC - аналог в: 12
UC - frequency: 16 MHz
UC - SPI Interface: yes
UC - microcontroller: Atmega32U4
Выходное напряжение от: 5.0 V
Выходное напряжение до: 5.0 V
UC - Цифровые контакты: 26

Design

Product Type: Запчасть для микрокомпьютера

General characteristics

Voltage From: 40.0 V

Other features

Brand: Pololu

Power

Nominal output voltage: 5.0 V

Description

A-Star, similarly to the Arduino Micro, is based on the Leonardo module - uses the Atmega32u4 microcontroller from AVR family. It is equipped with 26 digital inputs/outputs, 7 of which can be used as PWM outputs and 12 as analog inputs. The system works with voltages of 5 V, works with a clock signal with a frequency of 16 MHz.

The advantage of module A-Star Mini SV, is the ability to power with a high voltage with a voltage from 5 V to 40 V.

In our offer you will find:

A-Star Mini ULV - power from 0.5 V to 5.5 V
A-Star Mini LV - power from 2.7 V to 11.8 V
A-Star Mini SV - power from 5 V to 36 V
A-Star Mini SV - power from 5 V to 40 V

Unlike the Arduino Micro, it does not have soldered connectors (however, goldpin strips are included in the package). The user decides which leads will be needed so the board can maintain its small size.

Attention!

Before connecting readthe installation guide.

Leads

The figure above shows the distribution of leads of the A-Star Mini module from Pololu. With Yellow marked were I/O pins (input/output) with the name in accordance with the documentation of ATmega32u4, with green color marked were analog inputs of the A/C converter.

Programming

Creating and downloading software is allowed by the free environment of the Arduino IDE. Implemented bootloader allows you to send the program directly via the micro USB cable. A detailed description can be found in the instructions supplied by Pololu.

Useful links